wetoded

Yeah still haven't figured it out and haven't received any solutions but ill definitely post if I figure it out I just don't see any options that can adjust the flight height. I did notice while testing the BC horde questing profile that it did the same thing except on one path it actually flew up so I may dig into that see if I missed something

I tried that and its still acting like a hoverboard, I'm currently creating a quester profile and it all seems to be working well aside from the traveling. I noticed an option that's follow path and decided to give that a try I made a test profile that should just fly to a spot and then stop. my code looks like this: Runlua code> .....use flying mount=true(sopied from an example). pulse> testflight. (just had it record my path have forced to start at first position selected and have ttied both is hotspots and is loop ) stop bot> when I run it it reads the first line skips over the flight and stops am I missing something with this test? i did try my profile with deselecting the use path-finder but i get more issues with long movements my latency is at 100 and its within the default latency settings heres a snippet: [D] 21:03:50 - [Quester] RunLuaCode[3]: wManager.wManagerSetting.CurrentSetting.UseFlyingMount = true [D] 21:03:50 - [Quester] Wait[5]: 6000 ms [D] 21:03:56 - [Quester] New step (8): Killmobs>Pulse [D] 21:03:59 - [MovementManager] Avoid wall: StrafeLeft [N] 21:04:00 - [MovementManager] Long Move distance: 5.604249 [N] 21:04:01 - [MovementManager] Long Move distance: 2.041516 [D] 21:04:02 - [MovementManager] Avoid wall: StrafeRight [N] 21:04:02 - [MovementManager] Long Move distance: 2.427127 [N] 21:04:02 - [MovementManager] Long Move distance: 6.768142 so in this its skipping steps 6 and 7 but i did pause and restart the bot while testing is there a way to have it start fresh? after messing with it for a few hours still cant seem to get it to stop hovering and actually fly higher ground mounts work fine but i cant get to a point by ground (essentially on top of mountain)so need to fly and having it follow paths instead of just flying up and straight to point looks really bad. i did notice it seems to fly up a bit at first then coast down then once it hits the ground heads back up slightly.

so I'm having issues with the pathing for the bot, I created my own profile added all mobs etc. and recorded my own path, however, when I click run it runs my path backwards but also is using its own pathing and not the coordinates I recorded, the issue is mine looks like a person and it is using the flying mount at about 2feet above the ground and pathing using the roads. did I miss an option I disabled use pathing in the advanced settings but it still does it. I also had the same issue when I tried one of the premade questing profiles I had to turn off flying mounts because it would hover just above the ground which no one flys like that