Jouvre un nouveau sujet sur les instance , je suis en trains de faire des chemains pour enfaire plusieur d'affiler , mes le probleme ces que j'arrive pas a reinitialiser les instance avec le bot , je suis obliger de le faire manuelement ?

Bonjour,

 

Comme vous avez vu sur ce post:  il est maintenant possible de lancer du code dans  n'importe quel profil.

 

Pour réinitialiser une instance, il faut généralement utiliser la commande lua ResetInstances();

 

Essayer d'ajouter dans "Action" (à la position ou vous voulez reset) le texte suivant:

lua: ResetInstances();

ps: Sinon vous pouvez utiliser le bot quête pour faire un profil plus performant (  ) mais c'est plus compliqué et long à mettre en place.

bon ces aprfait sa comme option a rajouter :)

 

Y a t'il une solution pour faire passer un portaile avec une commande sans utiliser les cordoner ? car des fois il va pas asser loins et si ont mes trop aux fond du portaille de teleportation d'instance , il arrive qu'il ce fasse TP dans l'instance sans valider le dernier point et la il ce mes a vouloir y retourner alors qu'il et dans l'instance , et ce mes a bugguais dans un mur ou autre.

 

Ont une commande pour le forcer a passer aux point suivant si il et plus pres, ou y passe dessu , car ont aparer toujour aux meme cordoner quand ont rentre dans un donjon.

 

PS: La nouvelle syntax des profile gathering sont vraiment mieux comme sa maintenant sa fait mois mal a la tete de fouier dans les fichier que chaque cordoner soit toute sur une ligne :)

Apres plusieur essay j'ai pas reussi a le faire reinitialiser les instance , il va aux point et puis continue vers celui d'apres sans faire aucune action, et retourne dans le donjon :/

Voici mon code qui commence devant l'entre du donjon le boucle et retourne dedans ( Rempart des flamme )

J'ai mis 2 fois le reset aux debut et a la fin pour tester mes sa veut pas.

Bon apres peut etre que ces pas possible comme sa.

<?xml version="1.0" encoding="utf-16"?>
<GathererProfile xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
  <Vectors3>
    <Vector3 X="-354,8956" Y="3062,906" Z="-15,17339" Action="lua: ResetInstances;" />  
    <Vector3 X="-364.5175" Y="3086.51" Z="-14.71619" />
    <Vector3 X="-1356.349" Y="1643.121" Z="68.33944" Action=" c#: wManager.wManagerSetting.CurrentSetting.SearchRadius = 50;" />
    <Vector3 X="-1352.117" Y="1647.665" Z="68.55817" />
    <Vector3 X="-1346.689" Y="1653.494" Z="68.82853" />
    <Vector3 X="-1341.243" Y="1659.26" Z="68.70153" />
    <Vector3 X="-1334.769" Y="1663.913" Z="68.64816" />
    <Vector3 X="-1327.654" Y="1667.241" Z="68.61353" />
    <Vector3 X="-1319.729" Y="1668.488" Z="67.49151" />
    <Vector3 X="-1311.878" Y="1668.502" Z="66.00842" />
    <Vector3 X="-1303.922" Y="1668.282" Z="65.83798" />
    <Vector3 X="-1296.172" Y="1669.741" Z="67.28607" />
    <Vector3 X="-1288.234" Y="1670.18" Z="68.81794" />
    <Vector3 X="-1280.325" Y="1670.444" Z="68.75037" />
    <Vector3 X="-1272.984" Y="1667.749" Z="68.72349" />
    <Vector3 X="-1272.624" Y="1660.242" Z="68.94538" />
    <Vector3 X="-1270.998" Y="1653.668" Z="69.11938" />
    <Vector3 X="-1264.333" Y="1650.063" Z="68.53765" />
    <Vector3 X="-1256.385" Y="1649.89" Z="67.80486" />
    <Vector3 X="-1248.46" Y="1649.718" Z="67.42315" />
    <Vector3 X="-1246.033" Y="1642.886" Z="67.98942" />
    <Vector3 X="-1247.981" Y="1635.211" Z="68.51627" />
    <Vector3 X="-1245.48" Y="1627.856" Z="68.51955" />
    <Vector3 X="-1243.504" Y="1620.183" Z="68.51339" />
    <Vector3 X="-1242.362" Y="1612.308" Z="68.50414" />
    <Vector3 X="-1242.658" Y="1604.635" Z="68.50479" />
    <Vector3 X="-1246.859" Y="1597.91" Z="68.53342" />
    <Vector3 X="-1251.425" Y="1591.345" Z="68.54211" />
    <Vector3 X="-1255.982" Y="1584.792" Z="68.55057" />
    <Vector3 X="-1253.434" Y="1591.262" Z="68.55385" />
    <Vector3 X="-1250.796" Y="1597.577" Z="68.55666" />
    <Vector3 X="-1251.184" Y="1589.478" Z="68.53691" />
    <Vector3 X="-1253.38" Y="1581.846" Z="68.52766" />
    <Vector3 X="-1256.215" Y="1574.535" Z="68.60011" />
    <Vector3 X="-1261.001" Y="1568.178" Z="68.64702" />
    <Vector3 X="-1264.311" Y="1563.534" Z="68.61303" />
    <Vector3 X="-1266.353" Y="1555.787" Z="68.57071" />
    <Vector3 X="-1269.826" Y="1548.716" Z="68.56609" />
    <Vector3 X="-1273.367" Y="1541.554" Z="68.56454" />
    <Vector3 X="-1279.73" Y="1541.182" Z="68.57487" />
    <Vector3 X="-1286.372" Y="1536.78" Z="68.58087" />
    <Vector3 X="-1292.019" Y="1531.24" Z="68.58832" />
    <Vector3 X="-1295.037" Y="1524.187" Z="68.59241" />
    <Vector3 X="-1294.708" Y="1516.259" Z="68.59087" />
    <Vector3 X="-1294.378" Y="1508.331" Z="68.59127" />
    <Vector3 X="-1292.91" Y="1500.608" Z="68.59424" />
    <Vector3 X="-1289.45" Y="1493.47" Z="68.5948" />
    <Vector3 X="-1284.405" Y="1487.501" Z="68.59171" />
    <Vector3 X="-1277.469" Y="1483.648" Z="68.58863" />
    <Vector3 X="-1270.423" Y="1479.867" Z="68.58555" />
    <Vector3 X="-1263.363" Y="1476.078" Z="68.58092" />
    <Vector3 X="-1255.771" Y="1473.935" Z="68.57784" />
    <Vector3 X="-1247.859" Y="1473.656" Z="68.5686" />
    <Vector3 X="-1239.854" Y="1473.711" Z="68.56551" />
    <Vector3 X="-1232.213" Y="1472.128" Z="68.56397" />
    <Vector3 X="-1224.772" Y="1469.261" Z="68.56364" />
    <Vector3 X="-1222.149" Y="1464.673" Z="68.56818" />
    <Vector3 X="-1226.909" Y="1458.371" Z="68.57504" />
    <Vector3 X="-1233.274" Y="1453.703" Z="68.58429" />
    <Vector3 X="-1239.24" Y="1456.223" Z="68.58617" />
    <Vector3 X="-1242.32" Y="1463.543" Z="68.58001" />
    <Vector3 X="-1245.454" Y="1470.9" Z="68.56922" />
    <Vector3 X="-1239.462" Y="1468.133" Z="68.57083" />
    <Vector3 X="-1232.284" Y="1464.809" Z="68.57083" />
    <Vector3 X="-1225.559" Y="1460.623" Z="68.57187" />
    <Vector3 X="-1220.218" Y="1454.813" Z="68.57776" />
    <Vector3 X="-1214.441" Y="1449.386" Z="68.57063" />
    <Vector3 X="-1208.552" Y="1444.01" Z="68.55189" />
    <Vector3 X="-1202.411" Y="1442.227" Z="68.52673" />
    <Vector3 X="-1194.457" Y="1442.457" Z="68.49" />
    <Vector3 X="-1186.526" Y="1442.686" Z="68.45135" />
    <Vector3 X="-1178.556" Y="1442.917" Z="68.42503" />
    <Vector3 X="-1175.803" Y="1450.001" Z="68.42486" />
    <Vector3 X="-1178.823" Y="1457.331" Z="68.43453" />
    <Vector3 X="-1182.941" Y="1464.112" Z="68.44553" />
    <Vector3 X="-1185.829" Y="1469.252" Z="68.45209" />
    <Vector3 X="-1186.415" Y="1476.902" Z="68.45872" />
    <Vector3 X="-1181.825" Y="1483.02" Z="68.45973" />
    <Vector3 X="-1174.084" Y="1481.944" Z="68.44844" />
    <Vector3 X="-1169.053" Y="1475.88" Z="68.43676" />
    <Vector3 X="-1165.214" Y="1468.929" Z="68.42547" />
    <Vector3 X="-1160.891" Y="1463.382" Z="68.41533" />
    <Vector3 X="-1162.511" Y="1471.732" Z="68.42262" />
    <Vector3 X="-1161.049" Y="1478.895" Z="68.42667" />
    <Vector3 X="-1156.268" Y="1485.217" Z="68.42526" />
    <Vector3 X="-1152.798" Y="1492.19" Z="68.41653" />
    <Vector3 X="-1152.366" Y="1500.112" Z="68.41063" />
    <Vector3 X="-1152.059" Y="1508.086" Z="68.40472" />
    <Vector3 X="-1157.721" Y="1506.421" Z="68.41744" />
    <Vector3 X="-1163.266" Y="1500.724" Z="68.43401" />
    <Vector3 X="-1167.808" Y="1494.204" Z="68.4468" />
    <Vector3 X="-1173.875" Y="1499.456" Z="68.45833" />
    <Vector3 X="-1176.989" Y="1506.762" Z="68.46073" />
    <Vector3 X="-1180.097" Y="1514.053" Z="68.4632" />
    <Vector3 X="-1183.217" Y="1521.374" Z="68.4657" />
    <Vector3 X="-1186.334" Y="1528.687" Z="68.48833" />
    <Vector3 X="-1189.46" Y="1536.022" Z="68.48068" />
    <Vector3 X="-1191.684" Y="1543.497" Z="68.45167" />
    <Vector3 X="-1198.436" Y="1547.282" Z="68.45612" />
    <Vector3 X="-1205.457" Y="1543.47" Z="68.50587" />
    <Vector3 X="-1211.719" Y="1540.034" Z="68.55054" />
    <Vector3 X="-1216.483" Y="1537.4" Z="68.56492" />
    <Vector3 X="-1223.46" Y="1533.543" Z="68.49725" />
    <Vector3 X="-1221.601" Y="1526.225" Z="68.60051" />
    <Vector3 X="-1217.55" Y="1519.412" Z="68.56445" />
    <Vector3 X="-1214.533" Y="1512.17" Z="68.51927" />
    <Vector3 X="-1217.523" Y="1505.069" Z="69.12412" />
    <Vector3 X="-1224.067" Y="1500.771" Z="71.99458" />
    <Vector3 X="-1231.649" Y="1498.697" Z="74.56372" />
    <Vector3 X="-1239.466" Y="1499.314" Z="77.00996" />
    <Vector3 X="-1246.478" Y="1502.898" Z="79.8271" />
    <Vector3 X="-1250.958" Y="1509.451" Z="82.27676" />
    <Vector3 X="-1255.297" Y="1516.048" Z="84.68893" />
    <Vector3 X="-1256.091" Y="1523.939" Z="87.12193" />
    <Vector3 X="-1252.939" Y="1531.278" Z="88.84131" />
    <Vector3 X="-1246.466" Y="1535.611" Z="89.81774" />
    <Vector3 X="-1238.842" Y="1538.035" Z="90.43268" />
    <Vector3 X="-1234.254" Y="1543.719" Z="90.29049" />
    <Vector3 X="-1236.605" Y="1551.237" Z="90.58587" />
    <Vector3 X="-1238.994" Y="1558.885" Z="91.07375" />
    <Vector3 X="-1240.493" Y="1563.862" Z="91.07092" />
    <Vector3 X="-1242.286" Y="1569.979" Z="91.29583" />
    <Vector3 X="-1245.076" Y="1577.444" Z="91.19759" />
    <Vector3 X="-1250.268" Y="1583.38" Z="91.17014" />
    <Vector3 X="-1256.59" Y="1588.226" Z="91.69968" />
    <Vector3 X="-1261.84" Y="1592.214" Z="92.12196" />
    <Vector3 X="-1266.101" Y="1595.458" Z="91.72437" />
    <Vector3 X="-1272.362" Y="1600.318" Z="91.77206" />
    <Vector3 X="-1278.768" Y="1605.097" Z="91.77551" />
    <Vector3 X="-1284.87" Y="1599.137" Z="91.77509" />
    <Vector3 X="-1290.737" Y="1593.772" Z="91.77509" />
    <Vector3 X="-1296.839" Y="1588.652" Z="91.77245" />
    <Vector3 X="-1304.588" Y="1587.618" Z="91.78067" />
    <Vector3 X="-1311.745" Y="1590.904" Z="91.77296" />
    <Vector3 X="-1317.278" Y="1596.526" Z="91.76372" />
    <Vector3 X="-1320.823" Y="1603.344" Z="91.75576" />
    <Vector3 X="-1318.869" Y="1611.023" Z="91.74805" />
    <Vector3 X="-1315.155" Y="1618.05" Z="91.74805" />
    <Vector3 X="-1310.925" Y="1624.8" Z="91.74805" />
    <Vector3 X="-1306.077" Y="1631.032" Z="91.74998" />
    <Vector3 X="-1299.595" Y="1635.531" Z="91.74844" />
    <Vector3 X="-1291.704" Y="1636.093" Z="91.74844" />
    <Vector3 X="-1283.734" Y="1635.907" Z="91.72123" />
    <Vector3 X="-1276.393" Y="1633.674" Z="91.6953" />
    <Vector3 X="-1271.857" Y="1627.344" Z="91.67734" />
    <Vector3 X="-1276.25" Y="1622.049" Z="91.71189" />
    <Vector3 X="-1282.279" Y="1616.851" Z="91.75962" />
    <Vector3 X="-1288.466" Y="1611.966" Z="91.77458" />
    <Vector3 X="-1291.007" Y="1618.893" Z="91.75379" />
    <Vector3 X="-1292.62" Y="1626.774" Z="91.75071" />
    <Vector3 X="-1295.325" Y="1634.226" Z="91.74917" />
    <Vector3 X="-1287.044" Y="1635.554" Z="91.73838" />
    <Vector3 X="-1279.058" Y="1635.768" Z="91.70013" />
    <Vector3 X="-1271.945" Y="1639.133" Z="91.65625" />
    <Vector3 X="-1264.957" Y="1642.881" Z="92.04443" />
    <Vector3 X="-1257.851" Y="1646.481" Z="93.20277" />
    <Vector3 X="-1250.876" Y="1650.242" Z="93.1626" />
    <Vector3 X="-1243.953" Y="1654.133" Z="92.81847" />
    <Vector3 X="-1236.439" Y="1657.133" Z="92.80894" />
    <Vector3 X="-1230.114" Y="1661.933" Z="92.48407" />
    <Vector3 X="-1223.02" Y="1665.516" Z="92.68539" />
    <Vector3 X="-1218.475" Y="1667.787" Z="93.02624" />
    <Vector3 X="-1211.364" Y="1671.34" Z="93.17178" />
    <Vector3 X="-1204.245" Y="1674.897" Z="92.85113" />
    <Vector3 X="-1197.127" Y="1678.453" Z="91.86548" />
    <Vector3 X="-1190.036" Y="1681.996" Z="91.50735" />
    <Vector3 X="-1183.156" Y="1685.985" Z="90.97767" />
    <Vector3 X="-1177.425" Y="1691.46" Z="91.25785" />
    <Vector3 X="-1171.66" Y="1696.968" Z="91.49984" />
    <Vector3 X="-1166.49" Y="1692.624" Z="91.61755" />
    <Vector3 X="-1158.59" Y="1692.096" Z="91.49199" />
    <Vector3 X="-1151.014" Y="1694.505" Z="91.13275" />
    <Vector3 X="-1144.35" Y="1698.667" Z="90.74574" />
    <Vector3 X="-1139.124" Y="1704.476" Z="90.35551" />
    <Vector3 X="-1132.997" Y="1709.528" Z="89.96024" />
    <Vector3 X="-1126.864" Y="1714.586" Z="89.56289" />
    <Vector3 X="-1121.151" Y="1719.796" Z="89.38031" />
    <Vector3 X="-1114.564" Y="1724.231" Z="89.58693" />
    <Vector3 X="-1107.842" Y="1728.445" Z="89.79958" />
    <Vector3 X="-1101.106" Y="1732.668" Z="90.01258" />
    <Vector3 X="-1094.371" Y="1736.891" Z="90.22547" />
    <Vector3 X="-1099.402" Y="1735.032" Z="90.06216" />
    <Vector3 X="-1105.269" Y="1729.668" Z="89.88651" />
    <Vector3 X="-1111.137" Y="1724.303" Z="89.70996" />
    <Vector3 X="-1117.85" Y="1720.073" Z="89.4967" />
    <Vector3 X="-1124.635" Y="1715.916" Z="89.43176" />
    <Vector3 X="-1131.4" Y="1711.77" Z="89.82174" />
    <Vector3 X="-1138.172" Y="1707.621" Z="90.21116" />
    <Vector3 X="-1144.97" Y="1703.455" Z="90.60217" />
    <Vector3 X="-1151.994" Y="1699.735" Z="90.98613" />
    <Vector3 X="-1159.123" Y="1696.305" Z="91.36391" />
    <Vector3 X="-1166.322" Y="1692.842" Z="91.61616" />
    <Vector3 X="-1173.464" Y="1689.405" Z="91.50683" />
    <Vector3 X="-1180.628" Y="1685.958" Z="91.02428" />
    <Vector3 X="-1187.827" Y="1682.494" Z="91.3481" />
    <Vector3 X="-1194.962" Y="1679.061" Z="91.77905" />
    <Vector3 X="-1202.126" Y="1675.615" Z="92.68069" />
    <Vector3 X="-1209.304" Y="1672.161" Z="93.17318" />
    <Vector3 X="-1216.467" Y="1668.714" Z="93.15342" />
    <Vector3 X="-1223.693" Y="1665.619" Z="92.64786" />
    <Vector3 X="-1231.2" Y="1662.895" Z="92.46344" />
    <Vector3 X="-1238.548" Y="1660.011" Z="92.54655" />
    <Vector3 X="-1245.413" Y="1656.002" Z="92.85896" />
    <Vector3 X="-1252.305" Y="1651.978" Z="93.12974" />
    <Vector3 X="-1259.143" Y="1647.984" Z="93.25796" />
    <Vector3 X="-1266.008" Y="1643.975" Z="92.01301" />
    <Vector3 X="-1272.886" Y="1639.958" Z="91.65439" />
    <Vector3 X="-1279.778" Y="1635.934" Z="91.70099" />
    <Vector3 X="-1286.757" Y="1632.522" Z="91.74457" />
    <Vector3 X="-1294.186" Y="1629.659" Z="91.74815" />
    <Vector3 X="-1302.085" Y="1628.782" Z="91.74879" />
    <Vector3 X="-1307.148" Y="1634.605" Z="91.74879" />
    <Vector3 X="-1311.797" Y="1641.073" Z="91.73466" />
    <Vector3 X="-1316.191" Y="1647.675" Z="91.68078" />
    <Vector3 X="-1320.5" Y="1654.331" Z="91.80859" />
    <Vector3 X="-1325.344" Y="1660.652" Z="93.02403" />
    <Vector3 X="-1330.831" Y="1666.347" Z="93.14314" />
    <Vector3 X="-1335.939" Y="1671.385" Z="92.61338" />
    <Vector3 X="-1341.675" Y="1676.832" Z="91.46539" />
    <Vector3 X="-1347.463" Y="1682.327" Z="90.34211" />
    <Vector3 X="-1353.223" Y="1687.796" Z="88.58749" />
    <Vector3 X="-1358.976" Y="1693.259" Z="86.75476" />
    <Vector3 X="-1364.753" Y="1698.744" Z="84.9149" />
    <Vector3 X="-1370.592" Y="1704.159" Z="83.5316" />
    <Vector3 X="-1377.17" Y="1708.549" Z="82.74641" />
    <Vector3 X="-1379.644" Y="1713.909" Z="82.78036" />
    <Vector3 X="-1376.526" Y="1717.846" Z="82.83818" />
    <Vector3 X="-1375.539" Y="1725.468" Z="82.75623" />
    <Vector3 X="-1378.252" Y="1732.63" Z="82.48275" />
    <Vector3 X="-1385.239" Y="1736.235" Z="82.16665" />
    <Vector3 X="-1392.807" Y="1738.718" Z="81.80805" />
    <Vector3 X="-1400.535" Y="1740.611" Z="81.4338" />
    <Vector3 X="-1406.001" Y="1741.432" Z="81.16315" />
    <Vector3 X="-1413.952" Y="1740.842" Z="80.77188" />
    <Vector3 X="-1421.853" Y="1740.438" Z="80.66236" />
    <Vector3 X="-1427.191" Y="1745.718" Z="81.01096" />
    <Vector3 X="-1427.734" Y="1754.164" Z="81.46465" />
    <Vector3 X="-1428.206" Y="1762.241" Z="81.72845" />
    <Vector3 X="-1428.656" Y="1769.935" Z="81.94679" />
    <Vector3 X="-1423.292" Y="1770.413" Z="82.04514" />
    <Vector3 X="-1418.281" Y="1765.21" Z="81.86385" />
    <Vector3 X="-1414.008" Y="1758.502" Z="81.59781" />
    <Vector3 X="-1409.115" Y="1752.271" Z="81.19132" />
    <Vector3 X="-1403.161" Y="1746.967" Z="81.25993" />
    <Vector3 X="-1397.229" Y="1741.682" Z="81.61478" />
    <Vector3 X="-1392.069" Y="1735.686" Z="81.84417" />
    <Vector3 X="-1386.327" Y="1730.232" Z="82.20302" />
    <Vector3 X="-1381.542" Y="1723.874" Z="82.54285" />
    <Vector3 X="-1376.577" Y="1717.656" Z="82.83851" />
    <Vector3 X="-1371.194" Y="1711.837" Z="82.96011" />
    <Vector3 X="-1365.779" Y="1705.983" Z="83.44867" />
    <Vector3 X="-1360.381" Y="1700.146" Z="84.89355" />
    <Vector3 X="-1355.004" Y="1694.334" Z="86.93656" />
    <Vector3 X="-1349.563" Y="1688.452" Z="88.88648" />
    <Vector3 X="-1344.192" Y="1682.644" Z="90.53852" />
    <Vector3 X="-1339.253" Y="1676.483" Z="91.68134" />
    <Vector3 X="-1336.213" Y="1669.339" Z="92.87571" />
    <Vector3 X="-1330.076" Y="1672.328" Z="92.88949" />
    <Vector3 X="-1325.335" Y="1666.736" Z="93.15718" />
    <Vector3 X="-1322.444" Y="1659.338" Z="92.61609" />
    <Vector3 X="-1318.788" Y="1652.451" Z="91.61506" />
    <Vector3 X="-1318.504" Y="1644.706" Z="91.68517" />
    <Vector3 X="-1321.905" Y="1637.558" Z="89.15712" />
    <Vector3 X="-1329.04" Y="1636.8" Z="84.07551" />
    <Vector3 X="-1332.83" Y="1637.683" Z="78.99046" />
    <Vector3 X="-1339.885" Y="1641.363" Z="73.35664" />
    <Vector3 X="-1343.396" Y="1643.31" Z="68.68745" />
    <Vector3 X="-1349.063" Y="1648.491" Z="68.69841" />
    <Vector3 X="-1354.74" Y="1645.553" Z="68.42776" />
    <Vector3 X="-1358.08" Y="1638.321" Z="68.54375" Action=" c#: wManager.wManagerSetting.CurrentSetting.SearchRadius = 10;" />
    <Vector3 X="-1360.453" Y="1633.182" Z="68.45575"  />
	<Vector3 X="-359,3792" Y="3069,725" Z="-15,11198" />
	<Vector3 X="-354,8956" Y="3062,906" Z="-15,17339" Action="lua: ResetInstances();" />
  </Vectors3>
  <Npc />
  <BlackListRadius />
  <GatherEntry />
  <NotLoop>false</NotLoop>
</GathererProfile>

J'ai modifié le profil et ça à l'air de fonctionner: ddd.xml

 

Je viens de créer un plug-in pour reset les instances automatiquement (plus simple à mettre en place): 

Je viens d'ajouter l'option (dans les produits Grinder et Gatherer) "Back to last profile position" (qui veut dire revenir à la dernière position du profil après un kill/farm) (par défaut, le bot revient à la position la plus proche du profil).

 

Sans cette option, vu que dans ton profil (et tu n'as pas le choix) les chemins ce croise, si le personnage sort du profil pour tuer un PNJ et que la position du profil la plus proche et le chemin du retour, tu auras sauté une étape du donjon. Avec cette option activée, ton personnage va revenir à la position d'où il vient (même s’il y a d'autre position plus proche) et continuer le chemin du profil dans l'ordre.

 

Avec cette option plus le plug-in que j'ai posté sur le post précédent, il est simple de faire un profil de donjon.

Ha voila donc aussi un autre truk qui me poser donc probleme je pense des fois , car pas toujours mes de temps a autre je trouver qu'il bouclée le donjon rapidement ou oublier des point , mes en faite sa depander juste de la ou les comaba le mener et donc, ce bug arriver que rarement parcontre , mes merci beaucoup pour cette option :)