TNRakkGamer

I have been trying to figure out the same thing.

Hey guys.  Can anyone give me a quick run down of how to setup the party bot? I am just looking to level some RaF'd toons.

Thanks.

Hey guys. I am trying to make a wrotation for my Rogue.

All I want it to is kick or focus kick channel spells as early as possible or cast spells at like 90%...

Any advice?

I am trying to get the Ceremonial Drums quest to work, it is the very next quest after my Highmountain profile I uploaded.

It requires you loot 4 Large Drums, 4 Medium Drums and then Kill and Loot 4 Small Drums.

The Drums are scattered ALL OVER Thunder Totem so to best try to get them all I decided to break the Large and Medium drums down into 8 seperate "quest" so that the bot would run to one, loot it, run to the next, loot it, etc.

The problem I am having is that after looting the very first drum, it just stands there and never moves onto the next step. I changed my objective count to 1 respectively and it did not change the behavior any.

Any ideas?

EDIT: I tried doing Large and medium drums in a single gatherer but the elevator was kicking my butt. I would gather the 3 drums downstairs, run over to the elevator like I was going to ride it up, but its like it doesnt recognize there is an elevator so it jumps around and misses it everytime, causing a loop downstairs and ultimately failing miserably.

EDIT: I went ahead and added the profile as it is very short. You can see in the Quest Editor where I added a step for each drum. I removed them in the quest order editor as I was trying to different method. If anyone is able to take a look at this and offer a resolution I would greatly appreciate it!

HighmountainStep80.xml

Hey there. I am trying to do the quest in Highmountain to gather the Drums. The problem is, it is a gather quest and it keeps stopping due to "players near the node" is there a Runcode I can put before and after my quest to stop checking this, then start back checking it after I have turned in the drum quest?

I am sure that is all I need to do, I just dont know what the RunCode would need to be.

Thank you in advance!

Hey @Droidz, I am having a similar issue, where in the quester document does the "full LUA code" go? Is it possible for you to add the code to Eenys provided script that would make it work? Then I could just open it and see. That would be great!

Hey guys! I am trying very hard to get a Quester Profile that handles "The Fallen Star" chain. I think I have got the whole, fly to Suramar and swim around and kill the big baddie figured out but now I am running into some trouble with the Exodar portion.

Primarily because this portion is Scenario based... so the only way I can think of to try to get a character to do the necessary tasks is to use followpaths and interactwithnpc actions... which, if it is the only way, is the only way. But, I am curious if anyone who knows what I am talking about, has any other ideas.

Please share :D

If you feel so inclined as to try to throw together some sort of profile for me to look at (you would be an amazing human-being for such) I am trying to get it to go from:

Picking up quest from Khad'gar

Interacting with the Portal to Exodar (haven't figured this out yet)

Running to and Interacting with Velen

Etc.

Thanks for reading and look forward to any responses.

Hey guys! I have seen a lot of questions posed but not a lot of answers about the matter...

In my quester profile, what is the best way to have my char. use his/her hearthstone after completing a step.

In my particular instance I have to run to place A then place B then kill mob X and return to Dalaran (use hearthstone) I have the first three steps as 3 separate quests, just dunno how to do the next part (use hearthstone)

Thank you!

I am also having a problem once I get back to Azurewing Repose. You have to heal the dragons and one of them is in the cave, when I put the location in for it the bot ran way up and around and on top of the location... not straight into the cave? I tried to fix this with a FollowPath operation, but it hangs at the end of the Operation waiting for some sort of quest update or complete or whatever it may be doing.

I have some C++ knowledge as well as other various languages. Is there somewhere I can read up on Syntax within the bot? I feel like this may help me with trying to figure out WTF I am doing...

What I am needing here (as well as earlier with the whole Interact with the Withered Guy then follow him) is to know how to create a Quest Operation, have it run. Then have it move on without any kind of checks or anything. For instance, Interact with said guy, then move onto FollowPath (it gets hung at interact because interacting doesn't actually update the quest). Same thing here, I need to FollowPath, then move onto UseItemOn (It gets hung at FollowPath because it doesn't actually update the quest in anyway. BUT! I absolutely fixes the issue of running up the hill and jumping around endlessly)

Alright. New Question :D

I am trying to do the Disable the Mana Pylons, I thought I was slick just looking up the SpellID for Release Whelplings and creating a UseSpellOn Quest Entry... I was not...

I am going to have to try to do a Main Action Button or whatever that is called, and then click the ground at the base of the Pylons... anyone have any advice on this before I pull my hair out?

I am sure this is going to require some C# as I don't know how you would do it with the default options...

4 minutes ago, Reaper666 said:

Check and make sure you have "Can attack units already in combat" checked in General Settings. that may solve your issue

Ah, thank you. That is in Advanced Settings, I rarely visit that. I will check later to see for sure if this worked.

Thanks again.

So that I do not CLOG up the Forums, I am going to go ahead and post another question here, if no one sees it in a few days I will post elsewhere.

I am trying to add a quest that requires you kill two NPCs, not much trouble at all, the only problem is when the bot got to the second NPC someone was already attacking it so he looped (a short distance) back to the first NPC then back to the second... this is a no-go as they are very close to one another and it is pretty damn easy to tell something fishy is going on...

What do I need to do to make the Bot attack EITHER NPC regardless of whether they are in combat...

Hey guys, I am having a hard time with a certain quest in Azsuna.

Quest name is "The Consumed" I need to loot Crystals and then use the items they give on the little Mana-Drained Whelplings...

I tried doing two seperate Operations, GatherCrystals and then The Consumed... but my guy never once attempts to gather the Crystals... Can anyone try to point me in the right direction on this? It is one quest that contains a Gather and then Use Item On operation...

EDIT:

I have managed to get my guy to grab one of the Crystals, using Gatherer, now he will not move forward from that step...

I think it has something to do with using the same QuestID Twice, but if I dont use any quest ID it will not grab the Crystal at all...

EDIT:

Okay, I think the problem is that the Dim Ley Crystal does not actually go into your bags so the bot is never seeing that as complete. Anyone know if I need to choose something other than Gatherer here? How do I work around this fact?

EDIT:

Alright, I don't know why it worked... but when I put the 1 into Objective Count 2... it looted the Crystal and Magicaly went off on its own... So... That happened :D

For anyone following this hoping for some answers as well. I made two "Quest Entries" for "The Consumed" the first was a Gatherer with an Objective Count 2 value of 1 and the other was an "Interact with NPC" with an Objective Count 1 value of 10

Hello all. I am planning on starting work on some Questing Profiles. I plan to build one for each zone in Legion eventually as @BetterSister is on hiatus.

In the meantime however, what methods have you all been using to level your alts from 100-110?

I had some luck with skinning on my Hunter and just letting him grind it out for a few days, and had a little less luck with my Demon Hunter with Herbalism and Mining and just letting him grind it out for a few MORE days...

Anyone care to offer any advice on some alternative methods?

Hello all!

I just wanted to take a moment to ask if anyone has any input on the success of the Battlegrounder portion of the Bot?

So far I have just been using it to gather leather mats from Legion as I am hesitant to attempt too much too fast.

So, if you have been using the Battlegrounder are you just using the default Profiles? Is there anything I should know/do going into it to ensure I have the greatest amount of success?

I appreciate any tips/tricks anyone can offer.

Thank you!

18 hours ago, da8ball said:

Try Re-installing  SlimDX (4.0 X86),

 

 

Last night. After posting everything I ran through windows update, ran back through all of the things it said to download (they all said more current version already installed) and updated all my addons. Somewhere in the mix everything started working fine again. Thank you for your help!

Not seeing a lot in the way of Archaeology Profiles or anything really other than a massive assistance forum. Is there a "Get Started Here" for Archaeology?

I am just wanting to know how to get this off and going. I would like to be able to turn it loose on Eastern Kingdoms and let it go clear the Continent. Is that an option?

Anyone who can help me get rolling with this will be greatly appreciated.

2 hours ago, Droidz said:

Hello, Can you share your log file please (http://wrobot.eu/forums/topic/1779-how-to-post-your-log-file-with-your-topic/).

I sure can! I should note that I tried a fresh install and it did the same thing. What did work for me however is Launching with NO DX... Here is log file... not very interesting though :P

26 Sep 2016 14H39.log.html

What was your fix?

Hey guys.

So, I laucnh WRobot, I allow it to launch my game in 32-Bit mode. I login, choose a Character, smack the refresh button on Wrobot so it recognizes the game and character and then when I hit Launch Bot, it closes my game. So I tried going through the process two more times. Allowing WRobot to launch in 32-Bit mode each time (as I always do) and both times, when I hit Launch Bot, it closes my game out.

Any Ideas?

Hey guys. Can anyone tell me if there is a way to automate an action such as disenchanting using WRobot?

What I want to do is, after I finish crafting (usually due to bag filling up) click on Obliterum Forge, Right click crafted item (can set name as they are all the same) and then click the red "Obliterate" button.

Does this sound doable at all?

Hey there, when running a skinning profile in Legion I keep getting STUCK! I run the bot, check back and its closed with a popup window stating it is due to blockages. I log in and I am suck behind a stump or trailed off a cliff. There is a perfect solution for resetting the bot, Flight Master's Whistle! I just do not have the know-how with the bot yet to know how to implement this...

Any ideas or suggestions?

2 minutes ago, eeny said:

Its odd it doesnt cast... maybe due to the fight class range?

 

Tried pulling with provoke?

ERHMAHGURD! How on earth did I miss that? Everything looks good so far :D

Thank you so much EENY! Looking forward to those profiles!

Edit: still not using provoke EVERY time, but more times than not it appears.

I am still having trouble with the pull. For some reason sometimes it skips Crackling Jade Lightning completely, sometimes it cast long enough for a single tic to go off and sometimes it does a full cast, never seems to be when I need it though. Problem I am running into is targeting flying or perched birds and it is jumping in place and not attacking :(. 

I have gone ahead and attached the profile if anyone with a monk wants to take a look at it and lemme know what might be the problem.

ww monk by wlhr 2.0.xml

2 hours ago, Arcangelo said:

Set it as highest prioity, and make sure it have the right one -  

- like taget distance

- Taget hp % (to make sure you use it to pull)

Thank you for the info. I watched a lot of videos today and I am going to try to make my own profile this evening. I will let you know how it goes.