Party assistance

I am new to this and cannot figure out how to get party bot to heal anything at all.

Hi there, I want to use Wrobot as a support for my main. In this case a shaman which should heal and cast totems. I got the heal working however I cannot make my bot to cast any totem. I tried it with Strength of Earth Totem, but in the future also want him to case Windfury totem and others. My working file is attached. Can someone help me with some tips? Shaman Test v4.91.xml

Hi, im relatively new here, und at the moment im playing around on a tbc private server, trying to create a profile for alts following me in dungeons. Is there any way (in tbc) to get the threat percentage i have on the current target in c#? - i wasnt able to find something that seems to work ^^ tanks in advance

Hi In party product, the bot will not start regen if "ressurect when dead" is disabled thanks

Good evening, I've been playing in party mode for a while, and its bothering me that as soon as i target a mob with my tank (leader), the rest of the party instantly starts attacking so that i can't even setup a proper pull in a dungeon. I was trying to figure out a way to pause all instances of Wrobot (5 at the time, 1 tank, 3 dps and a healer) to stop doing everything and just follow me - or stand still - while i lure with the tank, and when im set up, with the press of a button they start doing their stuff again?

Hello, When my bot is in party mode, if I switch to Healer, my caracter just stay and doesn't heal. If I put healer on "off", he only heal himself. How can I do to get my robot to heal party or raid member ? Please help I use vanilla version, and defaut priest class mode ( but i tried also on druid, doesn't work either ) Thank you

Hello is there a way check if targettarget is a healer or dps then use taunt spell? And how to check what player class is it is or maybe even what his role TANK or DAMAGER or HEALER? I'm trying to do that with Lua check in fightclass but its not seems to work: usetaunt = "no" if UnitClass("targettarget") == "MAGE" or UnitClass("targettarget") == "PRIEST" or UnitClass("targettarget") == "HUNTER" or UnitClass("targettarget") == "SHAMAN" or UnitClass("targettarget") == "WARLOCK" or UnitClass("targettarget") == "ROGUE" or UnitClass("targettarget") == "DRUID" then usetaunt = "yes" end https://images-ext-1.discordapp.net/external/rqN-VTSxbTsvo8XjWgZR5MnRdQlTDs1H…

I been trying to do a pala 5 team, and set the dps to heal as well when someone is below 45% but no matter what the fuck i do the bots always heal themself instead of the low health player. The bot has full health but notices someone else go below 45% and throws the healing spell only at itself. The spell in question is holy light. paladindps.xml

How do I get my Party bot to mount and follow me on the mount? It follows me without the mount, but when I mount, it just stops following. I did specify the mount it should use ont eh ground - "Brown Horse". I am using client version 7.3.5.26972.

as of recent, these past few days, the Follow Selected player by name option seems to be a bit Faulty, will lose the Player and get lost behind the group, also seems to stop following once anyone in the group gets marked in combat, is this supposed to be happening? it was fine up untill this weekend/today Nothing inside the Logs shows any error of sorts.

Hi, I want my bot to cast a spell based on 3 conditions. 1- Me in combat :false (the bot spams the spell in combat even with this condition set + I also changed spell (combat only:false)) 2- Target distance 3- Target level When I put condition 2 first, seems like it cancels condition 3. When I put condition 3 first, it cancels condition 2. That's based on what I observed. How can I make all conditions meet ?

Hi, Just what the title says, Healer mode not working at all. My fight class is setup correctly with no issues because I tried to use wRotation to test my fight class and is working just fine. When I set to healer mode, my toon does not do anything. No plugins turned on.

Hello, i sometimes use the party tool to just follow the tank and go afk. It usually works well, but sometimes the tank range pulls (especially on big groups) and waits for the mobs to come. This is where to bot runs straight into the group and pulls everything on sight. As you might imagine this not just once caused a wipe and confusion amongst the other players, since a normal player wouldn't do that. Is there a work around or option for solving this ? maybe something like just engage the mob if the hp is less than 99% or something like that ?

Im am trying to make my healer heal other people in the party's pets. Im using a resto druid. I have a good healing class that keeps the party alive when im grinding. But it does not target my hunter or warlock pets. I have made a simple fight class with just rejuvenation. And put it in a party with my hunter. The only way I can get my healer to heal my hunters pet is if I manually target the pet and have no conditions on the spell. I have tried the conditions Pet Buff, Pet Health and just about every single thing. It seems to be an issue with other peoples pets. As my hunter can successfully cast mend pet on his own pet. Basically what I want f…

How do I force the party mode bots to focus the target of the leader? Sometimes 2 groups of fighting forms and its silly. I want everyone fighting the same thing 100% of the time. Ive tried some tricks using party commands and fight-class entries to force all partymode bots to assist the leader as their focus, but they simply switch back to their own target after and its really frustrating. Why are they fighting something separate from what the leader is fighting when the leader and the mob the leader is fighting is in range and pathable? Ideally they need to abandon whatever their target is and switch to the leaders.

dears what is the distance that slave charters folow the leader and how can i incress it i face some problem when follower toon stop follow leader and leader use "wait addons " Thanks

Hi, First of all, this is for vanilla. I have set up a party bot consisting of a main (me playing) and bots that have me on follow, in party settings. Everything is working fine, he heals all party members, but is not healing himself based on my configured conditions (flash heal or shield). He is buffing himself with Power Word:Fortitude tho. This is my current fight class: <?xml version="1.0" encoding="utf-16"?> <FightClass xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema"> <FightClassGeneralSettings> <FightClassName>Fight config name</FightClassName> <Range&…

Ever since the updates, and I dont even know if vanilla was updated but regardless. The party function is even more broke now. I cannot get the second person in the group to follow my main. I used to just have to select party as role and then tell that character to follow another and it would. Now it does not. And to be more detailed. If i start the bot in party role it will run up the character it is supposed to follow. But once it runs up to the character it wont continue to follow if i move somewhere else.

Hi, I am wondering if there is some way for bot not to stand on-top on the member it is following when member of party has stopped, or fight has ended. It looks very suspicious, especially when the bot is facing away from the direction of the party general heading. I have tried adjusting the follow distance. Thanks

So I am done searching and rereading the same threads that are getting me no where. I am starting to think this cannot be done via wrbot fight class creator and only via cs. What I want, you would think would be simple. When i set up to make it myself I thought I would spend 5min on it and be leveling. I am so many hours deep into this I have to stop. Roll up a blunt and ask the community. All i want for now and I can grow it from there is for a priest to follow my warrior and do nothing except keep renew up every time it drops. I dont want my dumbass priest to keep casting it over and over. I dont want my priest to target a mob and run up to it and swing …

I've noticed that my druid will not switch from the target he is attacking to cast rejuvenate on a party member. I'm using xml. (i'm not very good with any of the code). so basically what happens is party member #1 gets low hp, the druid is attacking the same mob, the druid casts the heal on himself. after combat ends, the druid heals the party member. Druid 1+ (TEST PARTY).xml

Hello, When i put Healer mod on my sham he don't want to put totem. When i desactivate this and healing with the fightclass, he focus enemy and don't want stop target enemy and heal himselt (already 100% life) and not the tank please help how can he put totem on healing mod?

Hello, I've been running a 2-char party setup and have noticed that the follower will not eat/drink when on low mana, despite having exactly the same fightclass / settings / plugins as the leader. Am I missing something? How do the followers know when to do this?

Loving the bot, but curious about the following while in party mode. Looks awful and very unplayerlike. Anything from being as simple as a slight randomization to where it's running (random offsets left/right) or as complicated as "following" in the general direction using the mesh would be awesome. Works great but anybody who watches for a minute or two is going to know that the characters following are bots or multiboxers, lol. Appreciate the help regardless.

Hey there, Is there an easy way to make the Party Mode setting assist others in the party against players? This is really the only mode that works somewhat well when using multiple bots, but when a player attacks the group, only the bot on quest/grind/whatever tries to kill the player, the partied bots just heal. Would be great if they would actually attack and help the main bot like they do against mobs. Thanks!