Archaeologist assistance

Good Morning all, When digging at a site that has enemies if I am in combat (not even fighting) my character just stands still and does nothing. Is there a way to stop this so he keeps digging regardless? Thanks.

Hello , "little question ; is it possible to only dig at 1 spot , for example ULDUM?? I need to get a mount there ! Greetz Davy

I leave the bot and i just keep flying into the sea and i come back dead. When i rez the bot just starts working again. If i pause and start again it works fine from there. This mainly happens north of kun lai summit and Isle of thunder and is seriously preventing me from using this bot. It is seriously flawed right now and im hoping you guys have a fix. I tried the other archaeology digsite list available but it does exactly the same thing. The worst part is that all the other digsites work fine, but when the bot comes to these areas it messes up. Please let me know if there is a way to auto pause/start the bot so it resets itself after a certain amount to t…

Hi, after last patch robot still dont see this digsite and digging nearby area with no avail of course, in false place. I'v attached log. This digsite is listed in product settings, I tried to increased it's priority value from 1 to even 10 with no avail. According to Your suggestion Droidz I checked my addons, but have none which can change wow's map's coordinates. Attached logs from flying colisions and death in deep see, going to no where Regards, Janavega 5 lip 2014 20H31.log.html 5 lip 2014 20H31.log.html

Hi, I posted my archeology problems in Pandaria earlier and done all Your suggestions Droidz (uninstall all addons, installed bot again etc.) but got still huge problem. Now, I have leaved bot running for about 7 hours in Pandaria and after like half an hour for nex 6,5 hours it was stucked AGAIN in hi mountains. Here is the log. Regards, Janavega 8 lip 2014 11H52.log.html

Hi, using Archelogy profile in Pandaria Bot have have always problem with flying in high mountains. Mount permanently is not go high enough and it's stack on trying to go into the rock. Besides of this my character not always fight with mobs, sometimes mobs hit's and my character is just standing and doying nothing, finally dies of course (after launching bot it fight's few times and than stoping without reason...) Both of these cases are stoping any progress in archeology of course so it'r ruther annoying to watch every 15-20 minutes if everything is ok. Will be gratefull for your help. Regards, Janavega

I'm at 75/75 skill, and it is not training and it is also combining fragments and researching or whatever you call it. I would like for it to only combine fragments and research if 600 skill or not maxed (ie 75/75, 150/150) for potential skillups. How can I achieve this EDIT: I have "Train New Skills" checked in Advanced General Settings

Hi, this is my first post in this forum xD, the bot works perfect, just a problem in Shadra Alor dig site in Eastern Kingdoms, the bot just stay in one place and acts weird, see the next video please. I hope you can help me. Cya. 28 jun 2014 09H54.log.html

I dont have any addons chaging the archeology interface, sometimes the bot works and solve, but sometimes he dont. Anyone else have this problem? Edit: My bad, problem solved by reducing the time to solve the artifacts.

So I'm Archaeology botting to get some achievements, and I've noticed the bot is choosing the dig site that is absolutely the farthest away. Just wondering if there was an issue with my settings or if it's WRobot choosing them like that.

Hi, i have 3 problems with the archaeologist feature, as i have seen in the topics and it happens to me quite a bit that some digsite's cause your bot to fly away from land and fatigue you to death, and others like the feeding pits are near impossible to bot to without repeatedly dying , i have tried several fixes to this but none of them work long term 1, if i uncheck the activate box of a unwanted dig site it seem to throw my bot out of whack and causes it to just stay in its current location or again fly off to fatigue 2. if i delete the dig site from the list it just auto reappears within a short time and not just on program restart but sometimes within mi…

When i try use the archaeologist in pandaria i just start flying off the island and die of fatigue and it doesn't work

Hello, When i start on any continent the bot works just fine. But when i try it in Pandaria, it repeats saying "Digsite zone not found" i will add the log as attachement. > I have tried fixing it by adding digsite zones. But that changes nothing. > I have also looked at the target position in the development tools but i see nothing wrong. The odd thing is, when I run the bot on another character with 600 archeology, it works just fine. No errors. Any one you know what is going on here? log.txt

I have all of the settings correct that I can tell. It just continuously flies west no matter what on Pandaria. I go to a digsite and activate the bot.. it mounts, flies up.. and flies west until it can't go any further or I die.

Coordinate in wowhead map http://www.wowhead.com/maps?data=5842:475819 17:30:08 - Go to Digsite Sik'vess Digsite 17:30:08 - Mounting fly mount Sunstone Panther [D] 17:30:48 - UnStuck() started. [D] 17:30:48 - Flying UnStuck - Statistics.Stucks updated, new value: 1. [D] 17:30:49 - Flying UnStuck - lastPost = 1422,243 ; 4352,62 ; 257,8896 ; "Flying" [D] 17:30:51 - UnStuckFly() done. [D] 17:30:59 - UnStuck() started. [D] 17:31:00 - Flying UnStuck - Statistics.Stucks updated, new value: 2. [D] 17:31:00 - Flying UnStuck - lastPost = 1422,381 ; 4353,288 ; 240,4388 ; "Flying" [D] 17:31:02 - UnStuckFly() done. [D] 17:31:10 - UnStuck() started. [D] 17:31:10 - Flying UnStuck…

[N] 12:40:21 - Failure No polyref found for start [N] 12:40:21 - Download map "HawaiiMainLand\HawaiiMainLand_-2147483648_28.tile" [E] 12:40:21 - DownloadThread()#1: System.Net.WebException: From a remote server 404 Not Found error was returned. 위치: System.Net.WebClient.DownloadFile(Uri address, String fileName) 위치: System.Net.WebClient.DownloadFile(String address, String fileName) 위치: robotManager.Helpful.Others.T2QP9FFw8R() continue to move strange place wrobot use help me plz!!

So I am Korean and not English The Korean impossible because local name recognition

My toon sets everything up at a dig site then it runs in the wrong direction to what the scope is showing any ideas why?

Hey , i got following problem : As is start the Archaelogist Profile the problem comes up , that he always tries to mount and fails. I had that 2-3 times now and it never worked proper. Keyboard Layout is on Standard and "move with lua" is on. I guess its easy to solve , but right now , i dont know any other option. Here's the log with the prob : 12:33:01 - Please wait, loading spellbook... 12:33:01 - Loading Digsites.xml 12:33:02 - Spellbook loaded. 12:33:02 - 259 Archaeology Digsites Zones in the data base. [D] 12:33:02 - Keybindings: Sit / Stand: Y Backward: S Forward: W Jump: SPACE Strafe Left: RIGHT Strafe Right: LEFT [F] 12:33:13 - CustomClass = [Ohren]…

I found that Wrobot was flying me to my death when trying to get to specific dig-sites. i found this thread: I've tried going to the digsite and manually update the location, but that does not work. For example, the The Clutches of Shek'zeer Digsite tries to fly me to the fatigue area. I went to the real location and clicked on [selected dig site is at my current location] but the coordinates do not work. I've attached a picture of the product screen to show coordinates and log is below. Is there a way to update / fix this?

after discover one artifacts, bot just mount up keeps finding next......not looting it...

Whenever the bot tries to go to this Dig Site located in Dread Waste it attempts to fly straight West over top the water on the far side of Townlong Steppe and keeps flying until death by Fatigue. I have attached log. 16 Sep 2013 22H53.log.html

i can feel bot is trying to survey right after one survey is done, because of the error message poped out" spell is not ready yet". the survey was 1.5 sec cooldown if i remember correctly not too sure. But now it is 3, i definitely feel it is longer than it was. this might be small. but over all will end up may be 5%~10% over all speed increase for efficiency, since i dont think it would be too hard for developer to make it happen xD. PS: the idle time is a bit too long between each dig and the "pause" before looting is just so obvious.......not trying too hard for a bot can already working amazingly but wish it could be perfect in any sense. ^^ en → zh-…

Hey , I have one question , is there an option to make the Char flying to the Teacher, if the Level for next Step (Like Trainee to Expert) is ready. I mean if i got 300 full and want to learn the next grade of Archaeologist , it just keeps surveying and doesnt runs to a teacher ? This wud make it ways more comfortable , if i dont have to run on my own to the teacher ? Thanks Flying Penguin

Hi, i got it working with adding the Trainer to the NPC Database. But i can select if the trainer is accessible by flying mount or not. The trainer is in a building, so when i select flying the bot trys to fly from outside through the roof and that of course does not work. So when i select False for flying, it tries to go there by ground mount and that takes sooo long. My question here is (besides looking for a trainer in the open): Is it possible to fly near the trainer and then ride or walk the rest. Like adding new coordinates where to land or something. Or maybe there is a way and i am just doing it wrong.