[FREE] 1-18 Alliance Quest Profile: Elwynn & Westfall 1.6.3

I haven't tested this, but I saw what you said about The People's Militia 1 1.

Assuming this is the quest:

http://db.vanillagaming.org/?quest=12

Go to your XML file, go to the <EasyQuest> declaration for this quest.
 

<AutoDetectObjectiveCount1>true</AutoDetectObjectiveCount1>
<AutoDetectObjectiveCount2>true</AutoDetectObjectiveCount2>

Set these to false instead.

<ObjectiveCount1>0</ObjectiveCount1>
<ObjectiveCount2>0</ObjectiveCount2>

Set these to 15 each, as below:

<ObjectiveCount1>15</ObjectiveCount1>
<ObjectiveCount2>15</ObjectiveCount2>

1 hour ago, Matenia said:

Set these to 15 each, as below:

<ObjectiveCount1>15</ObjectiveCount1>
<ObjectiveCount2>15</ObjectiveCount2>

 

In the Easy Profile Creator it says to this option: "Unused on this version". I also tried to fill in numbers there nevertheless, but still didn't work. As mentioned, all similar quests work fine without this. The "Is complete condition" does not work either. Same goes for splitting the quest up in two parts.

It says that it's unused, but it's not true at all. I've specifically tried what you did and it has fixed it every time in my 58-70 quester. Generally I ALWAYS fill in the objectivecount myself.
It could of course be some bug for this specific quest, but I doubt it.

28 minutes ago, Matenia said:

It says that it's unused, but it's not true at all. I've specifically tried what you did and it has fixed it every time in my 58-70 quester. Generally I ALWAYS fill in the objectivecount myself.
It could of course be some bug for this specific quest, but I doubt it.

Awesome, you are absolutely right! It works now as intended, after modifying these values in the XML file as you said. Thank you very much!

If you don't want a path to be run twice, you can use the completecondition for that step.

Quest.GetQuestCompleted(questId) || Quest.IsObjectiveComplete(1, questId)

Other helpful methods are

Quest.HasQuest(questId)
Quest.GetLogQuestIsComplete(questId)
Quest.AbandonLastQuest()
Quest.CompleteQuest(gossipOptionItem)
Quest.GetNumActiveQuests()
Quest.AcceptQuest()
Quest.CloseQuestWindow()

I'll look into this, to make the profile more flawless. Really appreciate your advices.

Well, here in Swabia we say, a lack of complaining is praise enough. So I assume it's awesome.

3 hours ago, FNV316 said:

Well, here in Swabia we say, a lack of complaining is praise enough. So I assume it's awesome.

That's just German attitude in general. 

isn't working right now. At level 4 it will spam click npc for "brotherhood of thieves" all day until you stop the script, after it has accepted the quest (won't gather items) and afterwards, i had no success getting the script to work for further quests even if i manually did that quest and marked it as completed, it would get stuck on the next quest or the one after etc.

Fixed this  problem dillondana BrotherhoodofThieves should be completed, before MillyOsworth can be picked up , also got a new problem pretty soon, bot doesnt pick up milly harvest objects, cause it doesnt have enough time to cast pick, should be 5 seconds, not only 3, any suggestions how to fix that?

fix in attach

FNV 1-18 Elwynn+Westfall FREE DEMO 1.4 .xml

You two are right. I assume the quest has been changed on Eylsium recently (https://github.com/elysium-project/server/pull/1543), so that you are required to have done the Brotherhood quest to do Milly Osworth. However, that leads to problems with later steps, due to Brotherhood of Thieves being an important trigger for Grape Manifest.

I'll release a fixed version within the next hours, please tell me if the problem still occurs.

Fixed and tested. Should now work as intended.

I hope so, as i wanted to play alliance rather than horde. Thank you.

I will test your profile until there is a problem (if so) and will report back.

10 hours ago, dillondana said:

I will test your profile until there is a problem (if so) and will report back.

You are very welcome to do so.

Bot does not realize bags are full and tries to hand in lvl 3 quest until I stop it.

Horrible.

15 hours ago, cj_mann said:

Bot does not realize bags are full and tries to hand in lvl 3 quest until I stop it.

Horrible.

Has nothing to do with the quest profile. That's part of how the bot works - you can set up when to vendor. Fucking HB crowd on these forums recently...

24 minutes ago, Matenia said:

Has nothing to do with the quest profile. That's part of how the bot works - you can set up when to vendor. Fucking HB crowd on these forums recently...

Options were set to keep at least 2 bag spaces open. It vendors properly with other profiles.

20 hours ago, cj_mann said:

Bot does not realize bags are full and tries to hand in lvl 3 quest until I stop it.

Horrible.

So is your problem description. As Matenia said, vendoring is not done by the profile. There can occur a problem if you receive more items as quest reward, than you have actually free space in your inventory left, but not less enough to trigger vendoring. So try to increase empty inventory slots or give me a useful description of whats wrong.

On 11/15/2017 at 1:20 PM, FNV316 said:

So is your problem description. As Matenia said, vendoring is not done by the profile. There can occur a problem if you receive more items as quest reward, than you have actually free space in your inventory left, but not less enough to trigger vendoring. So try to increase empty inventory slots or give me a useful description of whats wrong.

It is because he using profession bags. need to increase his open bag slots to the size of the profession bag. That way the bot doesn't count your bag slots in the profession bag.

@payyn518 Thanks for your review! (First one, woohoo  ) Any thoughts on what to improve?

I'm working on a 1-60 profile, 1-40 (1-20 in an improved version) is more or less done and tested, 40-45 is recorded but needs more testing. There are also features missing, like automated boats, hearthstones and most class quests. But due to time limitations and me not wanting to release something uncompleted, it won't come out before 2018.

I wanted to add some more feed back. There is a murloc quest in the wastfall that put the bot in the water next to a ship. This causes the bot to not move or die. I would recommend on any quests to keep the bot out of water, if you can.

6 minutes ago, payyn518 said:

I wanted to add some more feed back. There is a murloc quest in the wastfall that put the bot in the water next to a ship. This causes the bot to not move or die. I would recommend on any quests to keep the bot out of water, if you can.

Does the bot get stuck there / entering the ship and not respecting the blacklisted area? I'll look into it.

yes, it didn't want to enter the broken ship through a window. I used a melee class so that might be the issue. Sorry for not having more information, I just noticed it on my melee bot. I believe the warlock bot made it through that quest because of the voidwalker pet. 

36 minutes ago, payyn518 said:

yes, it didn't want to enter the broken ship through a window. I used a melee class so that might be the issue. Sorry for not having more information, I just noticed it on my melee bot. I believe the warlock bot made it through that quest because of the voidwalker pet. 

Only tested it on my local server, but it should avoid the ship now in general or at least swim around it.

Quote

It needs a repair vendor in westfalls

You have to go to General Settings -> Other Options  -> Automatically add nearest NPCs to database and activate repair & vendors.