Fight Classes assistance

Hi, I'm currently developing my Mistweaver Healing Profile and I need to check if I'm in Stance of the Spirited Crane or Stance of the Wise Serpent. How can I do this? Thanks for Help

Hello again all! this is a continuation of an old topic that died for some reason () so I'll cut right to the chase here. Basically the bot will attempt to use spells my mage doesn't know and if I remove all those spells it becomes stuck on a singular entry. The best I have gotten it to do is cast Frostfire bolt repeatedly but, that usually ends in death because my mage is too high of a level for just that spell. __________________________________________________________ Heads up! Some changes since last post! I switched over to arcane spec for the single target dps :D

Good Morning Guys! I need a working Combat Rogue Profile... KIM seems to be broken since it just cast poison in a continuos loop. Can anybody help me? Thank you in advance

I recently purchased this product with some enthusiasm only to find that the fight bot does nothing. I'm attempting to level a Frost Mage with this program but every time I launch it all he does is run to the quest spot and attempt to fight using his staff... Which kills him every time. The full session log is as follows: [F] 13:55:11 - Loading Fight class: C:\Users\The Overlord\Desktop\Wow addons (1)\WRobot\FightClass\[Ohren]Frost Mage.xml [F] 13:55:32 - Loading Fight class: C:\Users\The Overlord\Desktop\Wow addons (1)\WRobot\FightClass\[Ohren]Frost Mage.xml 13:55:32 - Start Quester Complete [F] 13:55:32 - Cast Arcane Brilliance (Arcane Brilliance) [F] 13:55:32 - Cast A…

Hi there, I'm trying to find a way to cast my DoT spells on several targets in grinder mode. Is there a fight class condition or option that can make the toon switch enemy targets before the first one is dead? I just wan't to find a way to get 2-5 enemies attacking the toon before casting AoE spells. I had a look around and I couldn't find any posts about this.

besoin de votre aide car je n'arrive pas a gerer le change forme sur la fin de fureur demoniac je voudrais qu'il : metamorphe Dot destin funeste spam trait demoniaque et la finir la fureur avec larme de chaos et revenir en forme normal sauf que la des qu'il peut plus faire trait démoniaque il attend et ne pose pas destin funeste. et aussi j'arrive pas a lui dire de juste poser destin funeste et revenir reprendre son cycle pour les combat long bien sur ca doit etre juste une petit connerie de condition 1AppWarlock Demonology.xml

Hello, I have an interesting problem that I see a few posts have briefly touched on but not resolved. There are certain NPC mobs that will just stand in one spot and cast. I've noticed that sometimes if I am standing more than 2 yards away but less than for example 8 yards or the minimum range for certain ranged abilities, the bot will just stand there trying to cast a spell which it cannot use because the target is out of range. Is there any way to tell the bot to move within say 1 yard of the target it's attacking all the time? I was thinking about doing this with the additional C# code in the fight class, but as I do not know enough about C#'s appli…

je me fais un profil Démoniste Affi et je ne sais pas comment faire pour le sort Agonie, il monte en stack 1-10 et je sais pas comment lui dire que avant les 3 sec de la fin il le refresh juste pour éviter de repartir a 1 Je suis nul et je comprend pas trop pour mettre des Lua au cas ou juste pour rappel (on sait jamais ) quand agonie posé il stack seul 10 fois et reste 10 sec et a 10 il tape fort si pas refresh il repart a faible 1

Hello, I need help to put this macro in fight class profile for my holy pala Macro: /cast [@charname] Holy Shock I need this becouse when I heal others in bg with holy shock its ok but when I want to heal my self the bot hits enemy target with holy shock. Please someone help :(

Hello, I have a pretty annoying problem with wrobots when doing battlegrounds, or grinding. Every time my char attacks a target, he toggles autorun mode on and runs to the target, going straight through him multiple times. It is pretty annoying for ranged/casters class, since casting most spells is impossible while moving. I have tried setting the range in the fight class but had no luck. The only way to solve it is that i have to activate and deactivate the autorun manually every time he gets a new target. I have also tried removing the keybinding from "toggle autorun", but that didn't help as well. Any suggestions? I am also attaching a log file, which should contain …

Hi, i'm using buzard enhanced shaman profile but I would like to add the fire nova for AOE, I don't know how to do it. I want to use it whenever there are 2 or more targets and when its cooldown is up. Can anyone help me?

i was just wondering what has happend to call the fight class there use to be a fair few to choose from and now theres not many at all im currently looking for a boomkin one but the one im using just is not cutting it, ive tried to make my own but i just have no idea on how to get it to work as to how i would play just thought i would asked what happen Thanks

I have 5 problems on Healer profiles: 1 - When i am on group, bot not verify my life, only life of partner 2 - When i am on group, bot try cast agressive spels on friendly targets 3 - I need duplicate any spell on XML to me and to party members. Bot not detect this. 4 - Spells marked with "cast on self", not work. Apears on log, but not cast. 5 - I need get the number of injuried players (With 20% or less of life) to cast mass spells. Exemple: http://www.wowhead.com/spell=740/tranquility Tks for help... :D

I need use this Havoc Macro: /targetenemy /focus target /stopmacro [target=focus,noexists] [noexists] /use Devastação /use Havoc /focus target /targetlasttarget This work fine on my bar, but on bot dont work. Look my XML: <FightClassSpell> <SpellName>RunMacroText("/targetenemy /focus target /stopmacro [target=focus,noexists] [noexists] /use Devastação /use Havoc /focus target /targetlasttarget")</SpellName> <FightClassConditions> <FightClassCondition> <ContionType>IsSpellUsable</ContionType> <Param xsi:type="FightClassConditionStringBool"> <Name>Havoc<…

je n'arrive pas a gerer charge trop pret je charge a distance de 20 mais ensuite il continue a clic sur charge a moin de 8m comment lui dire entre 8 et 25 ? condition j'ai mis target distance >> smaller et 20 [F] 14:26:01 - Cast Sanguinaire (Bloodthirst) [F] 14:26:01 - Cast Charge (Charge) [F] 14:26:01 - Cast Charge (Charge) [F] 14:26:01 - Cast Charge (Charge) [F] 14:26:01 - Cast Charge (Charge) [F] 14:26:02 - Cast Charge (Charge) [F] 14:26:02 - Cast Charge (Charge) [F] 14:26:02 - Cast Charge (Charge) [F] 14:26:02 - Cast Charge (Charge) [F] 14:26:03 - Cast Charge (Charge) [F] 14:26:03 - Cast Charge (Charge) [F] 14:26:03 - Cast Charge (Charge) […

bonjour en druid feral je n'arrive pas a activer le talent " Incarnation: King of the Jungle" good morning in feral druid I can not activate a talent " Incarnation: King of the Jungle "

Hi all :) Someone had a shaman resto profil for Wrobot ? or someone can make one ? Thx and have good day !

Bonjours. Voila j'ai crée ma propre fight classe pour mon mage, j'ai juste un petit problème avec la condition "en déplacement", je l'ai essayé sur vitesse flamboyante mais mon mage utilise le sort toutes les 10 mins au lieu de le spam des que je me déplace a pied vers un mob. auriez vous une idée de l'origine du problème et sur comment le régler ? Merci d'avance pour votre réponse.

Good day, I have managed to set up my own Holy Priest Fight (Healing) but have run into some difficulties. If i start the class profile it automatically starts healing indefinitely on myself if no target is selected. It does not give me the chance to select the target i want to heal as it starts to cast the healing spells on myself. I have to therefore start wrobot class when i am ready and stop when done which is a bit tricky. As with other fight classes for damage unless you have not selected the target it won't start casting. can you perhaps assist me. I have uploaded my class profile. Kind Regards, Pieter heal.xml

bonjour, Je cherche à améliorer le cycle du shaman élémentaire mais voila je ne comprend pas les conditions. je voudrais que des le début de combat il fasse : Pose du totem de feu ensuite horion de flamme donc actuellement je ne comprend pas comment lui dire de le poser au début de combat. Merci bien hello, (desolated my English medium) I am looking to improve the elementary cycle shaman but here I do not understand the conditions. I would like to start fighting it to do: Laying the then horion fire flame totem so now I do not understand how to tell him to ask at the beginning of combat. thank you very much

Please can someone assist me with a decent frost mage fight class profile. I tried the one you can download in the fight class pakc (OHREN) but think its a bit out dated. Please please please any help will be much appreciated. Kind Regards, Ragenz Edit: 4 Jan 2015 Ok, so I played around with a few settings on OHREN's fightclass profile and although I get a huge burst of damage in the beginning it averages on 18-19k which is very low considering the gear i have. My ilvl is 653 Spec: Frost Talent Tree: 2,3,3,3,3,1,3 My character uses Calamari Crepes food before each fight I activate Mirror Image manually before each fight and whenever its …

Hi, my probklem is that my hunter does not stay in distance to the target during grind. He walks to the mob and starts to rotate around the target instead of keeping fight distance. Any idea? Regards

Hello all, Here, I would like to create a destruction warlock class flight that makes sense, but for that I need your help because I freelance as slab XML. To help me explain what I need: Pre sweater - stone application soul so absent -Create If absent hearthstone - Vacuum Lord Invocation so absent - Application for dark - 100% life Pull: - immolation - Conflagration - Dark Soul - Incinerate X3 - Chaos Bolt Up to 20% of the mob, after substitute burning soul Combat Condition: - Use care to stone if …

Hi there, i´ve used the Searchfunction but didn´t find any Solution to my Problem, so i hope to get some Help here. I tried to create a Balance Druid Fight Class on my Own but when it comes to a Sunfire cast condition my Bot really does not do what i asked him to. In Fight Class Creator i Used the Name "Sunfire" the Conditions ( ive tried a few ) are "Is Spell Usable" -> "Name: Sunfire" -> "Need:True" and "Target Buff" -> "Name:Sunfire" -> "Need:False" but the Owlkin doesnt cast Sunfire when its ready and the Target doesnt have Sunfire. With Moonfire its no Problem and it works like a charm. When i start the Bot i noticed the foll…

Hello, sometimes, my pet disapear (not killed) and the bot doesn't seems to recall him, it only tries to revive him but he is not dead. So my hunter keep farmng without the pet. Any idea to how to recall the pet when he goes out of range? thank you