Quester assistance

So a while back these were posted: I think there may be another post or two but they are all marked resolved. I'm still having an issue with the bot pathing off the ledge in Mac'Aree: It will also at times try to path through buildings and other objects. Once it falls off it tries to run back to body but falls off again and again. Log: Spoiler [D] 11:44:06 - [Quester] New step (14): KhazaduumFirstofHisName>Pulse [N] 11:44:06 - [Path-Finding] FindPath from 5123.175 ; 9822.631 ; -76.88697 ; "None" to 5123.175 ; 9822.631 ; -76.88697 ; "None" (Argus 1) [N] 11:44:06 - [Path-Finding] Path Count: 1 (0y) 11:44:06 …

Hey Guys, i've been using Wrobot for a week and everything has been working great except the quester bot. I have tried many profiles, they load the spells but then take no action, i am already 110 and trying to do low-level quests. I have looked for a setting to ignore my level etc but can't see anything obvious. Log below, do profiles only work if you are at the level required or am i doing something wrong? 1 Dec 2017 10H01.log.html

Droidz can we get this updated please? I know Rebot is gone but Trinity is still around It is very usefull thanks in advance

So for ex on alliance rn happened on retail and rn it's happening on my vanilla server im on i do the first quest perfect! then i collect the second one and it just keeps going back to the same target where i picked up the quest...

I'm trying to use Quester to go after and kill Rukhmar. However when he comes flying around, the bot will see him from far away and try to go to him. By the time he gets to where rukmar is, he's gone past the pull location I had setup because Rukmar is flying and the bot likes to make a path on the ground. I keep getting the error: [Fight] Mob has moved more than 45 yards and then blacklist him. I've tried setting the search radius down to 20 but it has made no effect. I've disabled Blacklist NPC/Node if unable to make full path to reach it, so it does not blacklist it now, but still get the 45 yards message and still leaves the area. Anyway…

Hey I am wondering if there is a way to hearth and then logout. Basically want to run the bot for x amount of hours then hearth and log out so say I can start the bot goto work and after 4 hours it will hearth and logout. That way I have rested xp next time I log in.

hi i get the error when i press start on quest modus. trying new install but same. 17 Nov 2017 17H21.log.html

Is there something special that has to be done in questing to use flight paths correctly? Sometimes it uses them sometimes it doesn't and will run all the way across the map when both flight points have been learned. Prime example is going to stormwind from elwynn forest and back after picking up the and completeing the quest http://www.wowhead.com/quest=26394/continue-to-stormwind

I am trying to do this quest http://www.wowhead.com/quest=26320/a-vision-of-the-past it requires you to enter deadmines and use and item and then wait for dialog then it ports you out. I tried follow path but bot won't enter portal it is a walk through portal? Runs right up to it but not going through and my last hotspot is on the other side of the portal. Any help would be great.

Is there a way to open the Easy Quests Editor without opening Wrobot and attaching to wow, like how the fight class editor works?

when I run the quester ,use (01-05)NightElf, it just accpte the question ,then stand at there,do nothing.

I'm trying to setup a profile that would kill world bosses. Since the hidden quests are not in my quest log, I have "Not required in quest log" set true but it tends to skip over the quest. I think it is because i have no complete condition. However, I'm not sure how to make it check the quests for world bosses to see if they have been done and to move on to the next step. For example, Galleon's quest is 32098. How do I make it check to see if that is complete before going to next quest?

Trying to do this quest http://www.wowhead.com/quest=26230/feast-or-famine requires you to gather 5 Fresh dirt and kill/loot 6 tails. How do you do this at the same time using simple quester? I can do either but not both under same quest id. Thanks

Hi all i need to active to use traveler's tundra to sell and repair, when my character are 20, someone know the code to do it? Really thx

so i was wondering with honorbuddy gone i was finding a new bot . Well my one question is does Wrobot provide profiles 1-110 like honorbuddy ?if not were can i get them?

Trying to get useitem to work on target for this quest http://www.wowhead.com/quest=28808/fear-no-evil bot will run up to soldiers but will not use item? I have tried useitem, usespell, interact nothing works? Also why do you have to add some many quest id's for one quest? Bot can't tell quest is in log so just keeps trying to pick quest up.

Good day, guys. Sorry for my english, far not my native language. Some teoretical questions about pickpocketing. Just for discuss. Lets say we want to farm stuff by pickpocket. But we don't want to be detected. And don't want to use Grinder bot, because of to poor functionality. 1) What product do you suggest? I have thinking about Quester because then we may set up steps like "Farm-farm-farm-mail_or_open_chests-sell-farm-farm-farm", or something like that. But maybe i'm wrong. 2) To stay in stealth we have to avoid mobs. Not just stupidly run trugh them, if they are agressive. I have thinked about that problem for a while and honestly, have no idea how to …

Does anyone else have this problem? Just wondering if it's a problem with the bot or a problem with the profile I'm using. It's a paid Aszuna quester profile I bought here off the forms, but the bot keeps getting stuck A LOT. Like just in the first 15 minutes of running it ran into lots of terrain and wouldn't go around it. It basically made botting pointless because I had to watch it 24/7.

Need to: Exit Dungeon, Mount Up, Vendor, Repair, Activate Moll-E mail items selected. How do I force bot to exit dungeon and go to vendor everytime I tried to go to vendor I put a wait 90seconds and it waited and the timer went off when it was outside the dungeon when it was set to 3 mins go to vendor/mailbox and it did not mount up and sell/repair nor did it activate molle to send mail any of the times I tried 5 times all different timings

I am trying to cut off the end of a dungeon quester profile and make it exit the dungeon (Vortex Pinnacle) and interact with NPC after 60 minutes since I don't want to leave the platform because bot won't be able to reenter the dungeon if it leaves on it's own. I get this error heres my log I been trying to get it to interact with the NPC but it won't even leave the dungeon I barely entered the dungeon then tried to cut off the vector points of the dungeon profile to make it exit like it does when normally running the profile but I can't find the exit point of the profile either. Maybe this error will tell you what I'm doing incorrect. I am triyng to get it to cast the mo…

Hi all I have 2 question for you :) 1) I can set wrobot to kill mob only ranged, because in my server to complete a quest you need to stay in a particular place, then i need to kill a boss but don't move, i can do it? 2) I crea a quester profile for a World Quest http://www.wowhead.com/quest=42211/leodraths-kin, but Wrobot does not recognize the completed step of this quest, than interact forever with construct or kill forever the boss, i don't know why

Hi all i need to create a quest to speach with npc, summon a Boss and kill it, i try to use 2 different type (interactwithNPC after that killandloot) but my char speack forever wit npc and don't kill the mob, you have some idea?

I have a log with some issues where it can't find a bunch of quests. https://www.dropbox.com/s/s7scicttbf9bjfe/19 Oct 2017 19H53.log.html?dl=0 Thanks!

Hello Droidz and Community i have some problem Quest: Just a Drop in the Bucket I tryed it with C# and Simple InteractwithNpc but nothing works the all time trys to walk under the world becaus some paths goes under the world there if he try to talk with "Mereldar Plague Cauldron" have anyone some ideas to fix it?

Presumably, there is a way to test if a specific creature is still alive (using Entry ID (unique to boss/creature) or GUID), as I have seen code where this is done for a range of creatures using isAlive(), but how is this done for say a specific boss/mob? I cannot do this via a quest as none of my toons have the quests anymore, as in already completed. Also, is there any information on the API (functions/methods, identifiers, etc. we can use within IsCompleteCondition) ? Thanks :)