WRobot for Wow The Burning Crusade - Help and support

Currently the Bot is attacking out of nowhere Player. - Pet fight is disabled. I was watching it and yes it comes out of nowhere.

Can it be changed so the bot will prioritize NPCs in the grinder profile over any other vendor? If you are farming on the edge of a zone it can have you take a very long way even if the profile vendor would be less than half the time. Also when I have an interrupt set to "Target in Cast" set to true it will interrupt the first time but then cast the interrupt on every C/D there after whether that target is in cast or not. Also "Target Casting Time Left" with 500 (so .5 sec left) doesn't seem to work at all.

whisper me offer u would like for a perfect fightclass

As title says, i created few profiles for different classes. Let's take Paladin for example, i put at max priority Seal of Light, and in fact it works perfectly, with condition "buff <seal of light> false". The problem is when i want to use Seal of Vengeance, i write the exact same things, the exact lines of code, and it doesn't work. Like if the players doesn't recognize the spell. Same with Divine Plea, i just put it when mana is <45% (like druid innervate profile, which works perfectly) and again this spell doesn't work. Is something i am missing? Thanks for the replies.

When the bot dies, and resurrects it starts buffing. Once its finished re-buffing, it falls below the mana threshold that I have defined in the settings (Advanced Settings > Food/Drink > Drink Name > 35%). It then does not begin drinking before attacking something. This causes it to die over and over endlessly. Has anyone else experienced this on caster classes? I do not think it's a profile specific thing, as I've tried a few out and have seen the same thing on all of them. Any suggestions? Am I missing a setting, or is this some sort of bug with the WRobot client? @Droidz ?

Hiho! I noticed the bot often attacks enemy faction while grinding. I think it has something to do with both of us targeting the mob but enemy tags it first, bot will then keep on killing it. Afterwards it will very often attack the horde in this case, sometimes it attacks them just by running by. No better way to get reported than a bot trying to kill a real player (and therefore starting a "war") so they will see you every time and know it's a bot. Any ideas? @Droidz

hi i need help with lua code or C sharp code to add to the in bot creator if target just dodged script ive tryed the overlay (in tbc the buttons i guess dont light up when an ablity is proced at least not overpower as you have to switch stances) ive tryed is spell usable (does nothing) ive seached and not found any code i can understand (im not a coder) im sure this is simple for 1 of u guys out there i wuld love a battle stance to activate now script with lua in the creator if target just dodged ill need the return value reseach and return value var too.. if this can be done i thank you for ur time in helping me thanx

Hello, I was wondering if there is a way I can force the bot to follow certain path during grinding sessions. My problem is that I setup the route, but later I find my toon going far away from the route because it keeps going after nearby dead monsters or something like that.

Pick Up Quest -> pulse Quest -> Turn In Quest dont work, bot even dont pick up quest at NPC 28 июн 2017 12H33.log.html

hello im new and i didnt found anything.. to who i gotta write a pm to buy the bot with paysafecard im from germany and admin didnt answer me yet...

So first of all i was watching when a GM tryed to catch me. He simply portet me behind a wall close to me. The bot instantly ran into the wall cause of the low reaction time. ( You can test this simply when you run a profile and use Hearthstone. It takes a while till the bot get the right Path) Lucky for me i instant closed the bot. He tryed it ones more but the bot was already closed so he could not catch me. I had during that time "Close Bot if Teleported" Disabled cause its bugy with Deaths. My question is now when i have it active and get teleported a short distance, detect the bot that as a Teleport or simply run into a wall a…

Hi, I was wondering if anyone has tested the private server version on the new Warmane 2.4.3 TBC Server? I'm willing to fork over the 20 if it works well since I was so happy with the retail version of wrobot. Honestly, I don't even need questing, grinding, or gathering profiles. Just looking for a reliable fish bot because fuck fishing. Also, do I need to download a different wrobot version? Or can I use the most up to date version and just type in the new product key after I purchase the private server edition?? Thank you.

hi i posted on anther thread but i wanted to make a topic... hamstring just spams no matter what condtion you put this dont work... i even went to development tools and did a Player/Target Buff/Debuff check on target hamstring dont show up as a buff/debuff at all i also tryed wManager.Wow.ObjectManager.ObjectManager.Me.HaveBuff(69369) <---i replaced for hamstring ID and target instead of me and added the ! Replace "69369" by your buff/debuff ID. Replace "Me" by "Target" to check buff/debuff on current target (you can also replace "Me" by "Pet" to check on the pet). Add "!" befo…

Battlegrounder will queue for the first/second/third battleground as intended. After he is done he will start again at the first battlemaster => second => third. Keeps doing this forever. Looks kinda stupid and very obvious when a bot runs in circles in a crowded room for ~5minutes till queue pops. any way to fix this?

[F] 15:19:33 - [FightClass] Loading Fight class: C:\Users\thoma\Downloads\Wow bot\WRobot\WRobot\FightClass\magier.xml [D] 15:19:33 - [Spell] Ice Barrier (Id found: 33405, Name found: Ice Barrier, NameInGame found: Ice Barrier, Know = False, IsSpellUsable = False) [D] 15:19:33 - [Spell] Arcane Intellect (Id found: 1459, Name found: Arcane Intellect, NameInGame found: Arcane Intellect, Know = True, IsSpellUsable = True) [D] 15:19:33 - [Spell] Mage Armor (Id found: 27125, Name found: Mage Armor, NameInGame found: Mage Armor, Know = False, IsSpellUsable = False) [D] 15:19:33 - [Spell] Icy Veins (Id found: 12472, Name found: Icy Veins, NameInGame found: Icy Veins, Know…

Whenever i set the bot to use the spirit healer to get back to life it behaves accordingly, but if I set the flag "wait out Resurrection Sickness" it just ignores it and goes straight into fighting again, often resulting into more and more deaths. Could you please fix this?

Yesterday the bot works perfectly, but today he doesn't, i don"t really understand, i have try all of the solution. My filelog : Best regards. 8 juin 2017 16H09.log.html

I'm not experienced with bots at all, but I'm curious as to what I need to do to make my profile look more humanized. I've currently just created a simple profile by running around a certain area and recording the path. However, whenever the bot farms, it runs very robotic and static. How do I go about making it look more smooth and humanized?

Hey, sorry to bug you with another question but I have the Problem that my charactere keeps mounting every single time he mines a node, regardless of its disappearance or not. it results in very odd behaviour and he keeps missing nodes, plus it is super slow that way. tips ? thanks for any help.

Hello Im using fishbot on 2.4.3 client and Bright Baubles lures. Ive tried everything, using temporary bait, using as custom , normal bait. The bot applies the lure when it starts but than never refreshes it. Please help :(

Batlegrounder is queuing for Arathi Basin 1, rather than First available, for example. Same with all other BG's, how can I fix this? Thanks

Hi, i cant either use "Lua(return value in 'ret') nor Player/Target Buffs/Debuss. Also Me/Target Position also not working

How can i get the current stance? in vanilla i used a lua function llike this: function getStance() _,_,isActive,_ = GetShapeshiftFormInfo(1); if isActive == 1 then _print("Battle Stance") return 1 end _,_,isActive,_ = GetShapeshiftFormInfo(2); if isActive == 1 then --_print("Defensive Stance") return 2 end _,_,isActive,_ = GetShapeshiftFormInfo(3); if isActive == 1 then --_print("Berserker Stance") return 3 end end is it possible to use such functions with wrobot?

So on a melee class with no ranged abilities this is what my log does for about 90% of fights: 08:52:59 - [Fight] Player Attack Mottled Screecher (lvl 24) [D] 08:53:07 - [Fight] Player attacked by other unit, skip this fight. 08:53:07 - [Fight] Player attack before being attacked by Mottled Screecher (lvl 24) [D] 08:53:07 - [Fight] Player attacked by other unit, skip this fight. [D] 08:53:07 - [Fight] BlackList Mottled Screecher during 60 sec 08:53:07 - [Fight] Player attack before being attacked by Mottled Screecher (lvl 24) This isn't a problem until you want to use stealth in which case the bot never actually fights unless detected and…

Hi, In my grinder profile when the caracter is full and going to the town he doesnt use the flying mount correctly and trying to go by running or ground mount. Also to go back again at the spot of grinding it will only go by running and not by using flying mount. I've activated flying mount and disabled ground mount. Thanks to help ! :)