Bug Tracker

WOTLK  The Bot is using the right food at the right health percentage but doesn't stop eating. I used the "Feiner alter Cheddar" as example. (http://de.wowhead.com/item=3927/feiner-alter-cheddar)  

It doesn't close mailbox after finishing steps and then it doesn't realize that the mailbox is already open and there is mails to be taken

Title

problems with the yellow circle, took the bot, but still continues to yellow belt tightening when right mouse button.

WRobot for 3.3.5 I got a mutuation in my char name "Söan". Evertime I use the relogger and sometimes started WRobot by hand it's resetting to normal general config.

When you are on your flying mount the Bot sometimes does not land on the mining vein and gliding a bit downhill, tries to farm there and says it is (obviously) to far away. Afterwards the vein is on the blacklist for a while.    I'm loosing a good 10-20% ores due to this. It says farming succesful in my attached log (7:47) but it was not succesful Can you do something about this or should I fly higher? :D   If you want my farming-routine, just pm me, I am testing it

Im playing on russian realms. Settings is not saved correctly. I think robotManager.Helpful.AdviserFilePathAndName strips all non-english chars.

the window alignment feature of the relogger application doesnt work with wow WOD client (6.2.4), and with older client, for example 4.3.4 cata client  it only works when manually clicking on start button of every single profile, when using the "start checked" button, most of the windows dont get aligned, too.

Bots will attack the closest target over tanks target causing huge problems when trying to force killing priority and CCing. Priority when looking for new target should be: Tank > Lowest health > Closest Relevant settings used: Attack before being attacked: ON Search Radius: 300 Can attack units already in fight: ON Start fighting with Elite: On Helping Group Members: On Use LUA to move: ON

With this problem   Имя события проблемы:    CLR20r3   Сигнатура проблемы 01:    wrobot.exe   Сигнатура проблемы 02:    1.0.0.31687   Сигнатура проблемы 03:    56f2c600   Сигнатура проблемы 04:    System   Сигнатура проблемы 05:    4.0.30319.18408   Сигнатура проблемы 06:    52311185   Сигнатура проблемы 07:    238f   Сигнатура проблемы 08:    8d   Сигнатура проблемы 09:    System.Windows.Markup.XamlParse   Версия ОС:    6.1.7600.2.0.0.256.1   Код языка:    1049

First thing, Good job! Seems to work:) One thing tho I've experienced: The bot will just continue the route when harvesting minerals/minerals gives you the "Failed attemt" message. He will not retry. And for mineral veins, he will only harvest one time, then continue the route. In TBC, a single vein was clickable until there was no ores left.

Hi Sorry for my Englisch Everytime when startet the bot closed the wow game ??? Mfg franrpz

Hi, I have updated the BOT yesterday and now can no longer use it. If I start it and launch will once my character is loaded completed it just by itself. Please help because the log is not recorded.

Je n'arrive pas a retrouver ma clé de wrobot veuillez me la renvoyer dans les plus bref délais

You can set it to whatever, but the return value is always "true"

When the realm crashes and the relogger is called, it will sometimes (good majority of the time) get stuck on realm connecting, tries to connect to the realm when it is down, and sits on the window forever.    Solution, add a 5mibute timer, if relogger starts and not logged in within 5minutes, logout and try again or close wow and try again.

Rotation stops working after stun/disabled of any kind.  I need to target a different unit then retarget original unit to get it to work again.  I have tried multiple classes on multiple servers.    Will post a log later, going to bed.

In TBC you can mine a node multiple times and you can also get failed attempts when gathering herbs and ores but there is no logic to handle this! Kind regards, anon

When my character get disconnected relogger logs in to my account but when the realm selection window pops up relogger can not choose the proper realm to continue. Thank you for this excellent bot!! Kind regards, Anon

Whenever the WhisperScreenshot plugin is enabled in the tbc wrobot version the client crashes sd soon as I hit the start button.

Hello, when I use a flying mount flying the bot only just above the ground. thereby hestucks on very many places and looks strong after using bot and the bot can not continue to work. the flying height should be changed urgently.

Whenever I'm running my profile in Vashj'ir, the log is full of errors trying to mount the Abyssal Seahorse every 2 seconds:   [Spell] spellName=Abyssal Seahorse => Failed   It can successfully mount the Vashj'ir seahorse: [Mount] Mounting aquatic mount Vashj'ir Seahorse It will still give errors after mounting the Vashj'ir Seahorse. Also, any suggestion as to why it did not loot after killing would be helpful. At 03:04:26 it found and killed it, then mounted and

So, when my Bags are full and i turn on the option to use the Mammut it always wents to town like before. (german client maybe? cant test others cuz bad inet)

bot allways have problem with the big lumber trees. the bot try to mine into the tree and it still flying up down and around the tree

here are some suggestions for additional product settings and bugfixes for the party bot in the next wrobot release to make it more useful in PvP: additional settings: - when chasing an enemy, stop chasing after reaching a specific distance away from the player/partyleader defined at "follow by player name" and return to him | yes/no, enter XX meters range - dont chase any enemy, stop attacking when target gets out of range, always follow partyleader | yes/no - k

Helo. I just bought the bot, everything seems to work fine except the battlegrounder. I select the option to queue to random BG's then click on the start button. The program joins to the que and then nothing happens. The window to enter the BG never appears. Just tested it 2x 6 hours. I don't use any addon, already tried to set it to Dx9, I've tried to delete the WTF folder, also tried to run both the game and the bot with administration privileges. When I try it without the bot everything

[E] 14:19:18 - [Memory] Error during hook test. If the program freezes or has problems, I recommend to change your ingame directx version. 14:19:19 - [Memory] Select game process: 8464 - Ону... 14:19:20 - [Quester] Loaded 14:19:20 - [SpellManager] Initializing SpellBook - (Wait few seconds) 14:19:20 - [SpellManager] Initialize SpellBook Finished (12 spell found) 14:19:20 - [SpellManager] Please wait, loading spellbook... [E] 14:19:35 - Error injection: Cannot launch it, skipped.

burning embers ne fonctione pas ou alors tres aléatoirement

I was healing Halls of Lightning with my resto druid script and suddenly it started jumping around for no reason. I was at the last trash before boss Ionar. Druid was standing still when this happent and while it was trying to "unstuck" itself by strafeleft and jumping around it quit healing and 1 dpser died [F] 16:23:13 - [Spell] Cast Nourish (Nourish) [F] 16:23:15 - [Spell] Cast Rejuvenation (Rejuvenation) [F] 16:23:25 - [Spell] Cast Rejuvenation (Rejuvenation) [F] 16:23:27 - [Spell] Cast

alors je lance le logiciel ok il reconnais mon perso ok puis je met la clef de wow bot ok mais l'autre fenetre ne s'ouvre jamais . quand je lance wow en 64 on me dit de le passer en 32 mais il le fais plus

After WOW Patch 21742 the selected WOW Process closed after try to login the bot to the process

as i try to open the fight classes and load a profile or create new one ,,nothing happen just white screen note : i reinstall and download wrobot still have problem ,,,,,,picture down   

The bot has been acting normal, but noticed issues when it went to vendor got stuck and kept trying for hours, but it could be one of the bugs on warmane's mop it does have bugs that server.

Hello, I think all is on the title : my character is mining instead of fish when i launch my fisherbot ... Any solution ? Thank you

This awesome bot works 90% of the time. But some of the time I come back to my computer and see my character casting the hook 90 degrees from the actual fishing pool. It's simple to fix as I just rotate my character, but thought you'd like to know. Oh and it sometimes flies under water to get into position, looking pretty silly lol. As I said though, awesome bot. Regards

La condition des éclats d ames n est pas pris en compte , pouvez vous y remédier rapidement svp ?

All bg's .the game ice screen.

Hi, not sure if its a bug in general, but it happens in questing profiles. When you choose to do FollowPath and record a path, and not tick is Hotspots, then the bot sometimes just does Hotspots and even choose the last recorded waypoint and just goes right there. Any idea why this is happening ? The bot just skips the all the recorded waypoints and then goes to the last. If i also choose the option to force starting at first then the bot sometimes dont follow the path and just stands still

Using grinder/party profile on 2 windows of WoW.  Launch both to grind same area, works for about 1 minute, then 1 Wrobot crashes, the other still works.   Tried installing fresh folder in separate location, launch from desktop and root, same thing.   Please help with solution.

Hello,   I noticed a strange bug where flying mounts will use ground mount navigation if initially taking off (at least in Quester profiles. IDK about the rest).   If the bot never dismounts or isn't on the ground once moving again, it will correctly create a flight path to it's next objective, otherwise it will "hover" uning a ground path to get to the next position.   The only way to correct it is to pause/resume the bot.

Hello, I would like to report a bug related to this topic: http://wrobot.eu/forums/topic/2810-druid-wont-use-mangle/ In version 3.3.5, the Druid doesn't use Mangle (Cat), ability isn't located in the list of spells. When I typed it manually it doesn't work. I also tried the profile made by BetterSister the topic: http://wrobot.eu/files/file/609-335a-feral-dps-aio-v10-release/ Unfortunately, just as in my, Mangle doen't work. Probably it not recognized as a spell. The log does not have an

My Fightclass reach the 64k limit and doesn't work anymore. Fightclasseditor dont load the file Wrobot didnt show the options.   I can shorten the file for now), but it's a bug. Rogue - Combat v4c [BR].xml

I have a very annoying bug, when I put the "battlegrounder" the bot he can not enter the BG appears the window to accept and even I click will not, but if I do not have to open bot or have not entered the queue before it is open, I can enter. <(Manually) Another bug is collections ore it comes close to the ore and does not use it fails and then immediately ignore and continue the route. WoW 6.2.3 (20779) WROBOT 6.2.3 (20886

Greetings, My current setup is: - Duel screens - two Wrobot instances - three wow clients (2 slaves on second monitor) The problem is with Wrobot hot-keys (Alt+X, Alt+C, etc) not working with one of the two Wow clients. Example: Bot#1 WoW client#1 Wrobot#1 Bot#2 WoW Client#2 Wrobot#2 WoW Client#3 Master no Wrobot upon making WoW#1 client the active window and pressing a hot-key Alt+x or any of the hot-keys associated with Wrobot, Wrobot#1 does no

Hello , I want to play on a private server warlord of Draenor but it strikes me that this is impossible .. Can you help me fix the problem (I bought a license for private server ) TY

Before the patch, the fight class was working fine, but after the patch, I found that the bot has been casting Healing Touch before combat and casting it even when Predatory Swiftness is not present.   Below is the block of code.. <FightClassSpell> <FightClassConditions> <FightClassCondition> <ContionType>Buff</ContionType> <Param xsi:type="FightClassConditionStringBool"> <Name>Predatory Swi

I create a Fightclass with only 2 Spells. Both are instant. Both have the same setting (default). Saberslash with Prio 2, Pistol Shot with Prio 1   Nothing more. Simple to rebuild. For my opinion: Pistel Shot should never be used, because both have the same setting, and saberslash are first. Right ?!? ("Unlock fps" and "Improve Combat" are off) A test on the training dummy show others. Pistol Shot is used very often ... why ?!? I need a rota, not a random . Rogue - Ou

Hello, I have a problem with buff tracking of "Enrage" (Passive) When i check from development tools > Player/Target Buff/Debuff Without i have Enrage buff on me, i only see Enrage: ID=184361, Stack=0, TimeLeft=0 ms, Owner=0000000005A6529B0839680000000000, Flag=None, CasterLevel=100, Mask=16777216 With buff on me i can see both; Enrage: ID=184361, Stack=0, TimeLeft=0 ms, Owner=0000000005A6529B0839680000000000, Flag=None, CasterLevel=100, Mask=16777216 Enrage: I

Grinding in Northrend on stags/bears and bot doesn't skin mobs sometimes, it happens quite randomly so sometimes it would skin all mobs for 10 minutes, then skip few mobs and start skinning again or just skins half of the mobs all the time. Please look into skinning logic and make changes to recheck whether mob is skinnable and able to be skinned. P.s. same thing happens to honorbuddy for 3.3.5a so I had to make own plugin for it to skin correctly, will have to write such plugin for wrobot

The condition "Target is stunned" = false failed. Its not possible to check if a target is not stunned. I add my Fightclass file. The spell Cheap Shot shows the problem. With "Target is stunned" = false it will never be executed. Without this condition it stun, and stun and stun .... Tested an a dummy   P.S. the fightclass update for subtlety is comming soon...dont use this file. It will updated, if it is work fine. Rogue - Subtlety 1.2 [BR].xml

As title says, the bot can't find the path to leave Menethil Harbor city, it just runs into the wall.

voir mon post   

clean windows 7, all bs disabled (uac, guard, etc.), worked fine till today

Currently when you're going in a place that has monsters in your level of height and monsters way higher at height than you bot will try to attack everyone no matter how high the monster is. How it should be is do not try to attack monsters that are over 5 yd higher than you

I found this problem while using the party mode - Wrobot just wouldn't follow or help the party. After looking into the develpoment tools, i saw in the memory information that my other char was recognized as dead. I did test this with different characters on multiple battle.net accounts and different pcs - the problem was always identical. Every other player that is linked to your account with "recruit a friend" will always be recognized as dead by Wrobot.

the condition "Target Health Points" bigger 1 does not work correct.

I add a simple grinder profile to show the problem. I've tried to solf the problem with "Target health Points" but the spells will be executed. A lua check (unitisdeath("target")) work. So maybe its not a bug in "Target health points" but a bug in the death-detection I add my fightclass, but you will have the problem "Attacking death mobs" also with yours. Frostwolf-Ogersteine.xml

Hi! Since the legion prepatch new artifacts have been added. I think this is causing the bot to not solve Draenei nor Dwarven artifacts. If you can fix that?:)   Thanks!

wManager.Wow.Helpers.ItemsManager.GetItemCountById(uint) Not recognizing amount in Bag. For example I am using ItemsManager.GetItemCountById(5512) == 0 as a condition for Create Healthstone (Warlock) to only use the spell while Healthstone is not in my bags. It will keep casting "Create Healthstone" even while there is one in my bag.

Hi, everytime I try and use Archaeology, well only some digsites, it crashes.  Scourgeholm Digsite and Ruins of Zul'Kunda, but i think its just all of them at this point  

I don't really play caster, so i found this bug just recently.. Seems like the stuck detection is too sensitive for caster, cuz the bot thinks a lot of times, that he's stuck while casting. [N] 11:51:36 - [MovementManager] Think we are stuck [N] 11:51:36 - [MovementManager] Trying something funny, hang on [D] 11:51:36 - [MovementManager] Avoid wall: StrafeLeft Here's a video:   17 Aug 2016 11H50.log.html

Hunter auto shot aint working, ive tried everything.. 

So I'm running a custom grinding profile and wrobot randomly decides to hang up on itself. Just stops doing anything and I can't stop or start the bot. I can go trough the sections on the bot so its not frozen - just can't stop/pause/start the bot. I'm pretty sure it has something to do with the Loot-A-Rang plugin but I'm not sure, it mostly happens after the mob dies. There is nothing in the log, other than an entry to mount up.   01:07:53 - [Mount] Dismount [F] 01:07:54 - [Fig

Sometimes when you fight bosses, they stun you for 5+ seconds and then wrobot decides to blacklist them temporarily since it can't attack the target while being stunned resulting in ignored loot of the mob.

Dear Community, It seems the tracker has an issue with the feature By npc name. You can reproduce the issue with the new npc for Legion for example (but not limited to): The npc name is properly inserted in the right box, nevertheless nothing is appearing on the minimap (should be in front of my char). Cheers

Dear Community, While playing with the bot, I could see at multiple locations some links to download profiles and other files from the bot directly. Nevertheless, each time I choose to display the description or to download the asset, I get an error page. This is worth mentioning that I'm able to then search with the exact name of the asset using the search engine of the forum to find the related asset. It seems that the name of the asset is missing from the generated url from the bot.

Hey ! I'm trying to send chat message on the Trade channel. This is how I supplied the information to send in the bot and the error I got in-game once sent: Despite I specified the parameter 2 in the right field, it seems this value is not properly passed to the lua function SendChatMessage. The documentation of the function states: When whispering, the name of the target character is properly set and works. Nevertheless, it doesn't seem to be the case using Channel.

The checking of buffs failed, (maybe if there was a passive spell with the same name). I've uploaded a frost mage fight class. This will only work, if I changed "Buff" and "Buff Stacks" with lua scripts. Sample spell/Buffs are "Fingers of Frost" and "Brain Freeze"

Mostly on 4 wheeled/footed Mobs. You wil see it on the 4 foot Demons in the Legion pre-events. But a simpler test is in Ulduar at the Flame Leviathan. Start a cat druid with a fighclass from Bettersister or Drwolf. Both use Wild Charge. They try to use the spell in a range between 8-25 yards (I've changed it to 10, but this will also not work). You will get the ingame message "too near". At the moment the Flame leviathan is not killable as a cat druid with this fightclasses (due to the wron

10 should do the trick

Hi it seems like the bot can't check for this spell :-)   Tried with if - buff - buff timer - name of buff - c# code and so on - bot the bot simply ignores if the passive is active or not.   I would post a log - but the there is not anything inthere about the healing touch (the spell that should be casted when the buff is active)

Like it says, it crashes after starting any grinder/quester profile, had to roll back to 35712, latest backup I had :(

Transaction ID   ch_18pfRBE8IubbD8Ev7Qp3mr1H but no give me key

For some reason the corpse stays targeted after looting. This is causing the wow interface to keep saying "Can't attack that target" until the bot finds another live target or the corpse is out of range and becomes untargetted. Is there any way to fix this?

WRobot works fine on my desktop computer with Windows 10 and Directx 12. However, when I try to run WRobot on my laptop, which has Windows 10 and Directx 11.2, I get the following error: "WRobot cannot initialize Directx, you need to update it, do you want update Directx now?" If I click yes I just get sent to a website link that doesn't work. I don't think I'll be able to update Directx on my laptop anyway. It already says Windows is up to date. I think Directx 11.2 is just the highes

As soon as I press the " Launch bot " button the whole window freezes and doesn't respond and stays that way.  ??

Simple test: Go to the next training dummys, target one and the other will be get in focus. so far, so good. Now select the focused target and focus and target will be swaped. so far, so good Wrobot now stop the fight. Not so good .... TargetNearestEnemy() FocusUnit("target") TargetLastTarget() code will be found in "--autofocus". I attach my fightclass. @Everyone else: Don't use it. It's beta. I will release it, if it works fine.

When I launch the bot, I got the message that my toon is already in use. Exit wow, retry, same error.

bonjour quand je lance wrobot il me dit deja utiliser et sa deja meme avant de mettre la clé comment faire pour resoudre se probleme merci d avance

I've noticed that the bot will randomly move to the right (or some direction) then back really quickly. I assume to keep from being AFK which I understand. But when this happens, it unequips the fishing pole and equips regular weapons, which then it quickly tries to fish not using the pole. On the next cast it will switch back to the fishing pole.    Not using a fishing profile. Do not have anti-afk plugin on.    Is there a way to get it to stop? If its the anti-afk, can it b

This is more a notice rather than a bug report- If you suit up a new lvl 1 character in full heirlooms (no white items) and start any grinder / quester profile the bot will go to vendor and wont move away! My current theory is that the heirlooms durability isnt getting pulled correctly so the bot continually attempts to repair. The fix is to use atleast 1 white item until you can populate other slots with whites / greens (Gloves / bracers / belt / feet) and the bot will work as ex

Bot wants to mine Tin ore under 65 mining skill (2.3.4)

In Party mode, the Healer works fine - it's quite neat to watch it perform.  I don't have a character name entered to follow as I want to be able to control movement manually.  When I do move the character, WRobot hangs, and causes Warcraft to hang.  If I don't kill the WRobot process quickly enough, the game disconnects.

game version incorrect. when will the new version of the client wrobot?

Updater.exe does not update the old version (22566) of the client. where to get new version Build 22594

Bot is trying to requeue all the time, every 5 secounds, even if it did already queue. 2.3.4 TBC

[F] 02:02:13 - [Spell] Cast Sap [F] 02:02:14 - [Spell] Cast Pick Pocket [F] 02:02:14 - [FightClass] Launch LUA script: --Aggressive "Wait during Casting" is enabled on all spells Maybe a suggestion, maybe a bug. But in this case I need a wait for the CD of the previous spell (in this case Pick Pocket). All 3 spells are "Once a target" so the will not be executed twice. The cast  (via CastSpellByName(ssname,"target") ) in --Aggressive will be done, but because its on CD, nothin

So its possible to swim a short way in lava , but not longer then a view seconds. You will see the problem in Suramar (30:60). Sure i can to try blacklist the hole channel, dying from blacklistpoint to blacklistpoint, but better is to shorter the way through the lava or only use the way, if there is no other way to walk. Test it with a Melee char. Legion - Suramar - Teufelsschiefer.xml

Bot uses food and drink (should only drink) when mana is lower than 40% and hp is more than 50%.

Spell "Obliterate" does not work for Frost DK, not activated in any situation. (http://www.wowhead.com/spell=49020/obliterate)

Title says it all, the BG bot won't accept a queue pop, if i manually enter it I've noticed it also doesnt leave by itself. started after the most recent WoW update

Every minute wrobot tries to swap the weapons from Fishing Pool to Weapon and back. (simple test: enter the name of an artefakt-waepon of your second spec in the "WaeponName"Field of Fishing Bot. You get a error message every minute) Result: sometime it works, and sometime it doesn't and your Fishing Pool will be a tree branch. Not so good if a lot of fishing peoples around you. Please check the Equipment before you change it. (And why do you check it every minute???)

Skin/Gather/Mine Mobs ON Ninja ON Please check the profession before you try to skin/gather/mine mobs. The bot try to skin mobs without the profession skinning. In regions with skinnable mobs and gatherable mobs (and if you dont have  both professions) it looks strange that the char runs to dead mobs (ninja) without effects (no skinning, so not skinable)

Not 100 % what happend, i was making a fightclass for a hunter - all went good, saved it several times - as i made changed to it. Then i force closed the wow window, and the fightclass was deleted (Not even deleted to the trash or made an error or anything - simply just fully gone)   Was running the newest version of the bot - wow in window mode - with the WRotation bot active - when this happend.      

Ask for help. now have a laptop. since I can no longer in use. Since it shows me no ID or player name more WRobotRepairTools already used brought nothing System: Win 10 64 bit WoW 32bit of battlenet Program is currently

The Option to ignore Players if they are near a node make sense, if I gather, but in archaelogy the node is unique and only for me. so it is not productive to ignore the node.

When grinding yellow mobs/npc, sometimes it does not attack, just walk behind mob... Auto attack is on, attack before being attack is on... I have no idea why.

I have two spell entries. Both with the same name (Cheap Shot) . - One is for PvP an should ever be one. (no entry in the settings). - The other one (PvE) should be optional and default off. Bug: The Setting in the Cheap Shot (PvE) disable also Cheap Shot (PvP)

ID 202004    Talent Shaman  Landslide  id or name not working not recognize

The bot is not joining in the battleground anymore. He queues but when it pops he does not enter. It was working fine a few days ago and i did not change anything.