Bug Tracker

X is a very common keybind, lots of ppl use it for something else, i use it for autorun. since ppl harded use the function "sit" within game. And from log, i can tell, the error message that pops out does note us to change the bind to original, otherwise bot will do weird things like stuck somewhere and do nothing or hove above something and keep idling. I just think there is necessary to make bot determine other keys rather than X to have the sit function work (dont know why bot need to "

I notice that the profile will only pick up 1 quest at a time for me this seems almost bot like it would be better if the bot collected all of the quests at the same time in the area and then did them based on what quests was close rather then just picking up quest finishing quest moving to next quest 

Mages cant Channel spells Rogues Cant Cast Stealth If I find more I will add them here.

Looks like this..  What should i link for logs?      

Bot unable to make it's path to any of the NPCs located at Silverwing Grove in Ashenvale. Gets stuck at the fence and most obstacles, regardless if trying to enter or leave

After start, it starts running to the wall near the exit of the camp of alliance.

[E] 17:24:47 - Wow try to call protected function, if this happen frequently please report it. [E] 17:24:47 - [WarGuard] Call > GetThreadContext from: cbdd7c rebased: 1cdd7c   what is this?  

Hi, I miss the function to shut down computer when the bot is finished if Bag is full or lvl is arrived, you can close wow, but not the Bot or shutdown your pc. I hope you can still install Greetings BadHacker

I bought my second subscription this week, and now I keep accidentally using one that is already in use. Any way to remove product keys that are in use already from the menu? I plan on subbing more accounts in the near future (whenever I get my druids up a bit) and think this will turn into quite the hassle for me.

In quest Arugal's Folly i must click a item. When i in Feral then there come a error, that i am in shapeshift Form. 

Bot is attacking this elite mob even if i add him to ignore list. To kill it u have to lure some other mob to take off his shield buff so bot stuck there sometimes for hours. Tryed to add this zone to ignore list too but that also doesnt work. Im using gatherer profile.

This problem has been around for a year now, and it is not only that I have encountered this problem. My friends also have this problem. It seems that   other users  also have this problem. Hopefully you can fix this bug.

Hello, can you give me 1.12 shadow priest attack? My current pastor attack will only use one skill

Dear WRobot team, a long time i was a really active bot user with 15 World of Warcraft Accounts running, but after the addon cataclysm i decided to leave World of Warcraft and do other stuff. Some days ago i though it would be fun to come back and get prepared for the new upcoming addon. That's why i've searched a new bot, because Prioxbots is down and Nemesisbot is not longer for sale. Honorbuddy sucks in my opinion since the beginning and after i've read about the detection i'll stay away from

In current implementation i can add to XML fight class additional C# code like this and use settings window: [Serializable] public class ShadowPriestSettings : Settings{ ...bla bla bla } this works with settings class name exactly equals [FightClass]Settings where [FightClass] is name, declared in "General Settings" -> "Fight Class Name". It would be nice to use any name, with additional C# code like this: public void ShowConfiguration() { InnerSettings.Load(); InnerSettings.Cu

Hi again again xD   Another feature that would be really handy is the option to set a Max hight distance to flight mount - or reather an option to "just fly above the ground" As some zones is pretty much impossible to fly around in (becouse of something "above you")

i have offmesh in profile in Azsuna profile <OffMeshConnections> <OffMeshConnection> <Path> <Vector3 X="5.802792" Y="6734.506" Z="55.58629" /> <Vector3 X="-7.87693" Y="6733.143" Z="55.5886" /> </Path> <ContinentId>1220</ContinentId> <Name>Crumbled Palace (in)</Name> </OffMeshConnection> <OffMeshConnection> <Path> <Vector3 X="-7.87693" Y="6733.14

[D] 00：40：35 - [信息] 日志文件创建： 30 5月 2023 00H40.log.html [D] 00：40：35 - [信息] WRobot 版本： 2.8.0 （19808） 对于 WOW： 4.3.4_15595[D] 00：40：35 - [信息] 官方网站： https://wrobot.eu/ [D] 00：40：35 - [信息] 操作系统详细信息： 视窗 10 企业 版[D] 00：40：35 - [信息] 郎： 中文（简体，中国） [法] 00：40：36 - [内存] 找到 D3D9： 6A 14 B8 B0 1C BC 72 E8 CA 9F [E] 00：40：36 - GetRequest： https://download.wrobot.eu/wrobotcata/alert.php -> System.Net.Http.HttpRequestException： 发送请求时出错。---> System.Net.WebException： 基础连接已经关闭： 发送时发生错误。---> System.IO.IOE

Server seems to be down , you may try to disable your Anti-iwr or Firewall and try again . Note : This version may have bee blocked from our servers due to a suspect game activity or crack attempt , you can check it a new version is available on our Website or check our forum in News cat    How to deal with it? Thank you

All methods have been tried. Is it the IP problem？I'm In China.

Hello,  sometimes i can connect to the server, but when i try a bit later with a second client i cant connect: The only way to fix it currently is to restart and hope for the best. Running more than 1 client is not working.

Server Connection Failed to Wrobot server as today, use vpn also the same

Hey ! I'm trying to send chat message on the Trade channel. This is how I supplied the information to send in the bot and the error I got in-game once sent: Despite I specified the parameter 2 in the right field, it seems this value is not properly passed to the lua function SendChatMessage. The documentation of the function states: When whispering, the name of the target character is properly set and works. Nevertheless, it doesn't seem to be the case using Channel.

[E] 10:51:51 - SellItems(List<String> itemSell, List<string> itemNoSell, List<Enums.WoWItemQuality> itemQuality): System.NullReferenceException: Object reference not set to an instance of an object. at wManager.Wow.Helpers.Vendor..(String , String ) at System.Linq.Enumerable.Aggregate[TSource,TAccumulate](IEnumerable`1 source, TAccumulate seed, Func`3 func) at wManager.Wow.Helpers.Vendor.SellItems(List`1 itemSell, List`1 itemNoSell, List`1 itemQuality, Boolean quickSel

After a certain amount of time (not been able to find a specific time) it will no longer sell items in the bags.  It just continues to open the vendor, but doesn't sell anything. It had sold previously during the same profile and routes. I am assuming it is because it is supposed to be mailing items, but it is stating that it cannot find a mailbox.  It is standing right next to a mailbox at that moment too.   19:57:52 - [ToTown] Go to vendor Keldric Boucher (Vendor) 19:57:53 - [ToTow

Hi guys, I started botting on a Vanilla server recently as a NF hunter. Since the last update, the bot keeps selling stuff I put in the "Do not sell List". The item in question is "Haunch of Meat", which I need to feed my pet. I verified if the spelling was correct and it is. After launching the bot, I checked to see if the item still was on the "Do not set list", thinking that a plugin may have overrun it, and it is still present. I though that maybe the bot was using the fo

Hi, i've found a bug to the wrobot. When the bag is full, he sell every item without the white list. but in a second time, he sell epic item too ..   i've tried to disable and enable it, but still got the probleme.   Someone else saw that ? 

When my char tries to sell his white items its not working. It stucks and shuts down after a while. Any solloution to this?

Do not sell items only from 1 bag(left bag in interface), from all other 3 bags and backward fine sell )

Hey i have a problem, everytime the bot works and i stop the bot and close wow , the bot closing too and deleting all files..... is this normal?  All settings and files are deleted

Search distance is set to 12yrds yet this happens; 14:00:53 - [Looting] Loot Drakkari Guardian [N] 14:00:53 - [Path-Finding] FindPath from -356,5656 ; -592,5488 ; 5,109683 ; "None" to -351,052 ; -597,4797 ; 72,60866 ; "None" (DrakTheronKeep) [N] 14:00:54 - [Path-Finding] Path Count: 47 (806,0964y)

[E] 18:08:48 - QuesterState > TestCondition(string csharpCode): System.IO.FileNotFoundException: Не удалось загрузить файл или сборку "0j13gw5q, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null" либо одну из их зависимостей. Не удается найти указанный файл. Имя файла: '0j13gw5q, Version=0.0.0.0, Culture=neutral, PublicKeyToken=null' в Main.Pulse2() в Quester.Bot.Haovagaqiu.Baevi(String ijonocebeoha, Boolean omueqoifidei) Предупреждение: регистрация привязки сборок выключена. Чтобы

It did not work, it keeps repeating the skill until Savage Roar is actually recognized as a buff, and I think I've figured out the problem. I'll try to explain....The savage roar in legion 7.3.5 is a talent and not a buff literally then the wrobot is recognizing the buff: savage roar> false as the selected talent making it true, so he uses the skill many times before recognizing the buff and jumping for the next rotation skill that in this case is Rip.It is the same as what happens when you h

The bot often ressurect near hostile mob(s). This will result in you getting in combat with low hp. Seems the bot never tries to find a safe resurrection spot. Sometimes the bot ressurect immediately as the Resurrection dialog pop up. Sometimes it runs to the exact spot where it died, and then resurrect.

The bot seems to run right next to the door, like on all doors... and then after than starting to jump move around a little and then walk though - and as far as i can see, then it does it with every doors it comes across.   Please fix this - as this is one of the things thats really makes it look bottish

he keeps on running into walls on bgs any way to fix it and make it more like im not bbotting?

In my profile i run this code, on the private Wrobot for 1.12.1:   wManager.wManagerSetting.CurrentSetting.Selling = true; wManager.wManagerSetting.CurrentSetting.AttackElite = true; wManager.wManagerSetting.CurrentSetting.CanAttackUnitsAlreadyInFight = true; wManager.wManagerSetting.CurrentSetting.AttackBeforeBeingAttacked = true; wManager.wManagerSetting.CurrentSetting.SellGray = true; wManager.wManagerSetting.CurrentSetting.SellWhite = true; wManager.wManagerSetting.Curr

Hello, now this is impossible to run wow on schedule. For example, I want to run wow from 8:00 am to 6:00 am. You can say what we can do it with "wait" but in work not always. For example now is 18:00 (6:00 pm) I wanna to run wow from 20:00 (8:00 pm) to 19:30 (7:30 pm) (23,5 hours in a row). I will set 1) 2 hours wait 2) 23.5 hour to work 3) And there I should set 30 min wait but... But it will repeat from first row - "1) 2 hours wait", so my cycle will be 23.5+0.5+2=26 hours. So I jus

Rotation stops working after stun/disabled of any kind.  I need to target a different unit then retarget original unit to get it to work again.  I have tried multiple classes on multiple servers.    Will post a log later, going to bed.

After getting stunned/silenced rotation bot stops working on the mob. It won't attack it

I create a Fightclass with only 2 Spells. Both are instant. Both have the same setting (default). Saberslash with Prio 2, Pistol Shot with Prio 1   Nothing more. Simple to rebuild. For my opinion: Pistel Shot should never be used, because both have the same setting, and saberslash are first. Right ?!? ("Unlock fps" and "Improve Combat" are off) A test on the training dummy show others. Pistol Shot is used very often ... why ?!? I need a rota, not a random . Rogue - Ou

Hello @Droidz Can we get a scrolling bar in custom scripts inside the Quest Editor? would be nice tbh.

It wont seem to stealth and have it setup like would be in wotlk or that dunno what might be the issue. Should be able to call it buff like before and set it like pally auras.

5 8月 2018 19H57.log.html

You cant revive you pet becaus you are running! PS: Sry i dont know is it revive oder revival (German noob :D)

Hey I would love to see a feature to reverse the gathering paths, or perhaps some sort of randomization of which ways the bot choses to navigate the pathing. Both for increased security in bot detection, but also to avoid being a tail to somebody else taking all nodes at times.

Hi, I just have made a profile that is not a loop. The profile is like it starts from A to B and once B reached, it goes to A. A <--------------> B <--------------> A etc. I suggest to put an option in the profile maker to that kind of profiles becasue it's very annoying with the "long move distance"... If you wanna try, joined my profile. Thounsand Needles, sungrass and iron farming. Thank you :)

Il est useless et necessite une action supplementaire (un clic de trop) a chaque demarrage. A la place, un cadre coloré en rouge ou un prtit icone rouge en bas a droit pour signifier que c'est ON serat le bienvenu. En effet, parfois en BG on a besoin d'arreter / relancer wrobot et avoir ce popup ALT+X a chaque demarrage est genant,

sometimes, i fall and died in low ground and the spirit healer is at high ground. so i run downhill, the bot will click accept before i am on the ground. so what will happen is i resurrected with half hp in the air above ground like 30 yards(believe this is the max range when you can reach your body), and fall and die again!. pls add a latency so sometimes the ghost can be stable before it accepts the resurrection. ;p this does happens a lot in valley of 4 winds, there is a high hi

Maybe it´s just me, but i ticked as usual the "Wait until Resurrection Sickness is gone" Box, but the Bot still ignore this and goes like normal.  Looks like the setting diesn´t have effect. Happens since the last update.

I don't know if this can be called a bug, but before, when the bot died near the spirit healer, and the corpse was in the 40 yards (resurrection zone), the bot didn't use the healer and resurrected at the corpse. Now, even when the corpse lies within reach, the bot uses the healer, ignoring the availability of the corpse. It would be nice to do as it was before. After the latest updates:    

Would it be possible to add a function to restart the current profile or start the next one if X requirement is met Stop Bot if X is always implemented but i figured that a lot of problems will be fixed by simply restarting the profile

While Ressurection Sickness WRobot should sell all superflous  and repair appied items

Hi Droidz,   It could be great, if the blockade counter will be reset after 5 minutes (i.e.). At the moment it looks like that it counts simple forward.   If this is realised, the max. blockade could be set to a lower value (i.e. 3). 3 blockades in 5 minutes could be bad. 3 in 2 hours are not.

Bot is trying to requeue all the time, every 5 secounds, even if it did already queue. 2.3.4 TBC

is this possible to be added? I would love to see this as my server has a horrible selection of people every BG and there is barely any healers if not any. Thanks!

add a function that will reply whisper that has certain words like " are you there?" " are you botting?" words like "there" "bot" "botting" And the bot will reply with what user has premade like "what is up." "what?". 1. it wont reply more than once to the same person and will reply differnetly even to a different person( in case someone create a alt to whisper the bot to test) 2. i think it is a bit to work around and maybe not worth the time in terms of the result that no one can

Was thinking if it was possible to get a "curse / poison / debuff" database implanted. So we don't have to sit and put every curse and poison in conditions if we want the bot to remove them.

It's not being used for what it was meant for it's a hell of alot easier to track if people where creating forum posts for support

Hi again !   There are quite some quests that don't allow you to use items on stuff or take rides and so on if you are in a shapeshift form, mounted or in stealth.   So i would really really like to see a feature where you could disable this before using the item/talk to npc .   As this really stops the Leveling profiles from running fully afk :)

Hey. Got this Error spamed in LOG all the time now. Sometimes bot just continues, sometimes it stops: [E] 09:12:01 -  dfsg gfds gfds#2: Der Remoteserver hat einen Fehler zurückgegeben: (400) Ungültige Anforderung. This is TBC Version. Yesterday was a little update and before that update never had any problemes Thx for reply!

Yes, Remote is not working. i was turn on the Remote mode and then, error message outputted from the log. please check it... -------------------------------------------------------------------------------- 17:37:49 - Remote activated. [E] 17:37:49 - GetReqWithAuthHeader(string url, String userName, String userPassword): System.ArgumentException: 지정한 값에 잘못된 제어 문자가 있습니다. 매개 변수 이름: value 위치: System.Net.WebHeaderCollection.CheckBadChars(String name, Boolean isHeaderValue) 위치: System.Net.W

Hello, I use a remote computer in the cloud, which makes my computer is "streaming" so I can not use your bot would you have a solution?  

Botting legion. each day getting error. Launch wow 32bit version? Stop/star in relogger doenst help.  Only Close whole relogger and lauch it again helps. The same with Mists of Pandaria.  -After launch i see that version is correct and it's x86. On another private server relogger dont Type Login and pass at all, waiting forever ( 7.3.5 ) [D] 01:47:38.455 - Profile 1 dev 10, running task for 90000 minutes. [D] 01:47:38.960 - Profile 1 dev 10: Launch Wow. [D] 01:47:41.808 - Profile 1

The relogger configuration is correct, start WOW and Wrobot, and the game login is successful. After Wrobot loads, Wrobot does not start executing tasks. How to Fix？

Hello, if it is not difficult, add this feature please. I would like to add some random to start and end farm time, something like this: Thank you very much in advance.

Hi, please add <PathToWow> for each Relogger profile to choose separate wow executable for each profile for proxification purpose. Now I have to launch 1 relogger for each wow instance and it causes problems when 2-3 reloggers try to restart wow simultaneously PC may hang or reboot. I've bought yearly sub and plan to use Wrobot for both Wotlk and Legion later. Thanks!

Hello, could you add a similar function to the relogger to randomize the profile launch schedule, just if you do it through the plugin, the launch setting changes forever, but I would like the default values to be saved.   for (int i = 0; i < Relogger.Classes.ReloggerGeneralSettings.CurrentSetting.Profiles.Count; i++) { var p = Relogger.Classes.ReloggerGeneralSettings.CurrentSetting.Profiles[i]; if (p.Settings.ScheduleFrom.Time

I have 2 accounts on the same Bnet, WoW1 and WoW2. The relogger won't select WoW2 account when logging in, it always logs into WoW1 account, even though I have it set to log into wow2 account in the settings. This is a copy of my settings in the relogger. https://gyazo.com/ff19928b76903d277ed51dec00d10426

I find that if the server crashes the relogger feature doesn't work properly. It gets stuck on the Realm Selection screen as shown in the screenshot below. After investigating the forums I found that the relogger should be relaunching WoW after X minutes defined in your settings profile. Despite having mine set to 2 minutes I find my bot stuck on this screen very often.    

Hey @Droidz Is there any way you can Add schedule for Relogger, not run/wait specific amount of time, but Run only if Time is for example : 10:00 - 18:00, i found another topic where guy asked the same, but you didnt respond for his second post. Relogger quickstart with windows setup schedule may work, but when you wanna add 4 groups by 6 hours a day in sequence with 1 relogger it wont work that way. or maybe it's hard to setup. Back in days i used something like Run 360 , wait 1080 and seco

Wrobot itself (by hand) run, but with same key written to relogger, it says invalid licence key. (Got key from purchases, ctrlc, ctrlv to both!

After last update  I have 2 accounts, and use pauses (task "wait") So, after "wait"ing wrobot use wrong profile. It tries to load currently runned profile. For example, run both profiles. 1st gone to "wait", 2nd continue farming. When "wait" of first profile ends, wrobot loads second profile (not first) and freezes.

http://joxi.ru/v297OR0H3blebr  http://joxi.ru/EA4aKdJHwR6per Relogger keeps relaunching WRobot although there are tons of Wrobot already launched and working properly, please fix !   Relogger log : [D] 06:33:25 - [Info] Log file created: 3 ноя 2017 06H33 - KlOs.log.html 06:33:25 - Relogger 1.2.0 (21339) started. [D] 06:33:25 - [Info] Offical website: https://wrobot.eu/ [D] 06:33:25 - [Info] Operating System Details: Microsoft Windows NT 6.1.7601 Service Pack 1 [D

Hi, please add "Pause" button for Relogger. It will be very nice to use it when server crashes or connection goes unstable to just pause all Relogger activity for a while and then resume when needed.

Hi, this errors after relogger trying to relogg

When i start WoW over the Relogger, the Relogger opens WRobot in an endless loop.  

I dont know if this is the place to do it but i get a error when i use relogger when its coming back from a break.

@Droidz I pmed you this issue, but you didnt reply, could you plz check it out, its importatnt for me. I use remote desktop to connect to my botting pc. 1. If i start Wrobot using Wrobot.exe, it will run ok, but it will crash if i connect to my botting pc using remote desktop. 2. If i start Wrobot using WRobot.exe -nodx -nolockframe, it will run ok, and it wont crash when i connect to my botting pc using remote desktop. So it is all ok this way. But there is an is

Relogger dont want to bind wow window to setuped place on Desktop, this bug only in Cata wrobot version

Hey. I have the problem that my bot account als already at the same account with my main wow. When using the relogger, he logs into the main account and cant select the right account. My main account is WoW#4 but the relogger will not select WoW#6

Hi, when I'm using a batch file to run wow, relogger is just launching it over and over, assuming that games has failed to launch, even though 1st instance is already running fine. HBRelog handles batch launching fine though, please fix that coz it's a crucial feature for me. http://joxi.ru/brRdeg3SJyPlx2?d=1

Relogger does not log in and astuck at "Please connect to the game" window if in general settings path to Wrobot.exe is not at the same directory as relogger exe. I can't run any bot with a new wersion anymore, have to log them all by hands. What's the heck? Tested with 1.12 relogger.

Hey, I have the problem the relogger crashes instantly in the login process, hes rezising the WoW Window, after that he crashes. Client: 3.3.5  

Since the latest updates, checkboxes (✓) have become invisible until the field in the relogger is running. Please fix that. This is only on windows classic theme. For clarity, I am attaching a video.  

After installing wrobot patch for 7.2 there are 2 problems with relogger A) sometimes it forget fight class. In relogger is written proper class, but it force to run bot with another. Detected with grinder, maybe problem is in grinder. B) sometimes blizz dc char to character select screen and report: You have been disconnected, blz (dont remember code) and relogger dont know what to do with that.

does not enter login and password, only restarts the wow window

Relogger is not working properly for me. Upon starting a Relogger profile, the game client starts, but instead of logging in, I get a pop-up saying there is an update (when there isn't one) and it effectively won't get beyond this "error". I can run WRobot without Relogger fine, but every time I try to use a Relogger profile, it never gets past the pop-up.

the window alignment feature of the relogger application doesnt work with wow WOD client (6.2.4), and with older client, for example 4.3.4 cata client  it only works when manually clicking on start button of every single profile, when using the "start checked" button, most of the windows dont get aligned, too.

Dont relogging after update!

Sometimes when the game Server maintenance,loging,you can see the server  line selection screen, but click the server line,can't get into the game. This situation  The relog function  of the BOT is  no use, after Server maintenance,stuck in the server selection screen. （ In this situation I already stuck so many times ） Suggestion:   If The bot can't log into game , return to the account input screen, or the bot can auto select the server lines.

Had this happen while using the Burning Crusade version of the bot: [D] 01:05:29 - [Fight] Fight stopped 01:05:29 - [Resurrect] Player dead 01:05:30 - Player Teleported [E] 01:05:30 - !Memory.IsProcessOpen Not sure why, but upon dying (and possibly releasing their spirit), the bot thought I was teleported when the most likely thing that happened was I spawned at the Spirit Healer. Thoughts?

Hello, Plugin :  doesnt work on Vanilla. Where can i change the time? In the Grind/Quest Profile? Do you have solution for this? Thanks ?

The `Regeneration` state should have event handlers (`Start`/`Loop`/`End`) in order to allow plugins / fight classes to execute rotations. The use case is as following:   - The bot doesn't have food - The bot needs to regenerate HP but has mana   In theory the FC could spam heals / potions if they are available, and it would be quite elegant to implement this if special events are added. I know that `FiniteStateMachineEvents.OnBeforeCheckIfNeedToRunState` / `FiniteStateM

Hello, WRobot uses water/food but WRobot continue regging although health/mana is full

In extended option on Tab Food/Drink there are no names from food/drink deposited. Nevertheless the log shows me after fight a regen session

Hi, I need a possibility to say the char. "Stay here until ....(Health=100% or Buff=xxxx) My Fire Mage class can manage food (and this work good in wrotation). but with archeaology it sits (will eat, health<50% ), stand (will fight/grind/archealogy), sit (will eat health<50% ) ....and so on... Only fight was a reason to break the regen/eat phase.

The bot seems to be placing a higher priority on looting over taking time to regen. Please consider placing REGEN as a higher priority over LOOTING. Often time the bot will be very low health and/or OOM and the act of moving to loot pulls more mobs before being able to regen using drink/food typically causing an unnecessary and stupid death.  Now: Fight Loot (accidentally pulls mobs and possibly dies) Regen Ideal: Fight Regen Loot Thanks

I though the bot work in official server, can you make me a refound pls? thanks